CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Bent’s power steering office pool
- Thread starter Bent77
- Start date
-
- Tags
- journey sucks
Surprisingly no, and it wasn't me either.
You try a new box yet?
I thought this truck had a brand new psc box?
I thought he was running some old box he put together, but I do remember talk about a psc now hmmmThey are doing a warranty exchange. Pump included
Already have the tracking number. Should be here Tuesday
Wanna shoot for two and guess the pressure now?
Box of Oreos on the line
modified valve with PSCs unmolested fitting
Na I’ll quit while I’m ahead
1580
Too late!
Shit I was damn close. Glad it’s working!
Me too. We’re going out this weekend. I’ll report back
rampage
3/4 ton status
I don’t care what you measured, I still say 2020. 
Steering was a little, unsmooth I guess. Pulled the 1/8” fitting and went to a 5/32” (this is what I have traditionally used)
Smoother. Lock pressure stayed the same, 1600 psi
Valve internal parts remained the same
Using 2x #4 washers and stretched the bypass spring to 2”
Smoother. Lock pressure stayed the same, 1600 psi
Valve internal parts remained the same
Using 2x #4 washers and stretched the bypass spring to 2”
That's progress!!!
How difficult would it be to back the pressure down to 1500 or less? Would pulling one washer drop too much?
Curious if there would be any immediate difference now that you have opened up the flow capacity a little.
How difficult would it be to back the pressure down to 1500 or less? Would pulling one washer drop too much?
Curious if there would be any immediate difference now that you have opened up the flow capacity a little.
I ended up buying a PSC pump today with some of that fancy swepco fluid from summit. Figure it can’t hurt.
Just hurts your wallet
I’m fairly certain it enjoys it after this year.
