Blazer K5 6.2 d got twins

[Karl Larsson]

Good evning "at least in sweden"

Got my front back from the paint shop yesterday and today I started to install the radiators
for the intercooler system, and try to figure out how I gona line all the water hoses and where
I gona mount the pumps for the intercooler system.

 

[runamok151]

Her come some Pictures from a nice sunday in the K5 garage



View attachment 199276

I think I see room for another turbo in there.

 

[Karl Larsson]

I think I see room for another turbo in there.

Ha Ha Ha no problem runamok But first help me figure out how to route the left 3 inch down pipe
down here whitout cutting my truck to pieces

 

[76zimmer]

I'm anxious to see how that big compression likes the twins...should be super on the low end!

 

[AgDieseler]

Ha Ha Ha no problem runamok But first help me figure out how to route the left 3 inch down pipe
down here whitout cutting my truck to pieces

View attachment 199506

Not sure the dimensions you're working with, but in tight spaces I've used oval 3" tubing. Twin stacked 2.5" tubes accomplishes the same with a step up on volume.

Great looking intercooler setup.

David

 

[Karl Larsson]

Hi foks! this weekend I starded the work building a down pipe for the left turbo
I decided to take it one the outside of the frame!? I Think it would work.
I also test mounted my new radiator, here some pixs!

 

[sreidmx]

Nice! Love the downpipe

 

[Karl Larsson]

Completed downpipe built.

 

[Mark Leisenfelder]

this is awesome I'm dying to see how this thing holds up

 

[Karl Larsson]

Friday evning at work

 

[Karl Larsson]

Hi everyone! Got some work done this weekend, finished the work with my innerfenders that where a Little
more work one them than what I had defied.
Ended up with that I replaced one of them because some previus owner had done some realy bad
rust repair that look like crap!
Came a cross a guy that lives in Gothenburg that imports rust free orginall from Arizona!
But still hade to do all the paint and pre paint job.

I also hade the time to start mont back the front one the truck, her some pixs

 

[Karl Larsson]

Only final assambly left

 

[sreidmx]

As always nice work!! Looking good!

 

[JoshHefnerX]

You do pretty awesome work dude!

 

[Karl Larsson]

As always nice work!! Looking good!

Thank you for those words, I m realy looking forward to get the truck up running
Now when the summer i around the corner, so I can start trying out all my "think it gona work stuff I made"

 

[desertrat67]

Thank you for those words, I m realy looking forward to get the truck up running
Now when the summer i around the corner, so I can start trying out all my "think it gona work stuff I made"

Very clean build. You are putting a good amount of attention into this thing. Good job. Keep it up!

 

[WyoSquareMan]

Looking awesome! Awesome attention to detail!

 

[Karl Larsson]

Just some small progress

 

[JoshHefnerX]

Keep hoping one of these days we get burnout pics!

 

[Karl Larsson]

Jepp josh it Will come but I think I just gona do some nice drivning around first when I finally get this together ! But like you all now after a little time you
Allways end up with some ruff testings