CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Blazer's 85 Suburban "Twinkie"

So have a bit of a long term plan to do a spare tire carrier. Not a clue at this time what to do yet but it is in the thought process. Really not sure where I even want to put it. Only place I know it is not going is the roof.
 
So here is what I did today.
Upper B / C tube in both sides in.
Second row seat belts tubes bent and installed. Going to have to pull the 5th seat when I get to finish weld them.
Passenger side of the V between the B / C done barely tacked in because I need to weld the upper bar fully first. It is notched and cut and good to go.

side341.jpg

side340.jpg

side339.jpg
 
Last edited:
Test fitted a front fender, going to be a lot of work.

Have to decide if I am going to use the current fenders or use the 73 ones that I have. I am going to use the 73 hood so that the cowl is part of the hood.
 
Is it a specific tan? I wanna touch up the tube doors cause they match my two tone perfectly.
 
Top Bottom