CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

body mounts and the ORD body lift

jonathon

1/2 ton status
Joined
Jul 22, 2007
Posts
1,877
Reaction score
1
Location
Washougal, WA
I discovered a few days ago that I need new body mounts on my Suburban.. and I'm missing a bolt all together :eek1:

I was curious is there anything particularly tricky about doing the 1" ORD lift? On the Subs are any of the mounts above the fuel tank?
 
not sure on the Sub-specific details, but I thought it was a good idea to disconnect the steering shaft from the steering box and the trans shift linkage too.
 
Sounds good and easy.. good excuse to toss the XJ shaft I have in then :rolleyes: My rag joint is starting look pretty tired(not as bad as the one in my K5 was when I swapped it though).
 
not sure about the burb. but my blazer the way GM did it ( which is very homosexual) I had to cut holes in the floor pans to get to the body mount bolts. oh, make sure u cut the fan shroud first and disconnect the shift linkage, the steering shaft shouldnt give u ne problems. my body mounts are trashed too.. check out this side...raybuckauto.com.. alot of helpful products there.
 
yes the tank blocks 2 of the back bolts on a sub so it has to drop

Those are probably the trickiest I'd assume? I got to drop my tank for the shackle flip anyways, I'll hold off till I have the mounts and lift in hand then :eek1:
 

Latest Posts

Top Bottom