Looks good. Next time leave the nut on the stud when you are beating on it.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Check it out pics of da LIFT
- Thread starter TexasBlazerBoy
- Start date
TexasBlazerBoy
1/2 ton status
cbbr said:
Lessons learned.....
I learn them the hard way or not at all. 
NewUser
1/2 ton status
ive been wondering what my truck would look like with the top off and with the factory rallye wheels on it...after seeing that first side shot of yours i now know....our trucks could almost be twins 
littlejimmythatcould
1/2 ton status
Yes, I selected my words carefully, but leave it to someone (cough...bear76)to twist them around I'll have to look into the seafoam stuff. I've used PB blaster before and it's good stuff. Thanks man.
I'll have to look into the seafoam stuff. I've used PB blaster before and it's good stuff. Thanks man.
TexasBlazerBoy
1/2 ton status
NewUser said:ive been wondering what my truck would look like with the top off and with the factory rallye wheels on it...after seeing that first side shot of yours i now know....our trucks could almost be twins
I think yours is in better shape than mine, it looks that way to me.
I just saw in your sig were you are running 33's. That was my original nOOb plan, 4" /33s, now I want to go bigger 35-36 trimming won't hurt my feelings as long as it is not FUGLY.
TexasBlazerBoy
1/2 ton status
littlejimmythatcould said:Yes, I selected my words carefully, but leave it to someone (cough...bear76)to twist them around
I had a wide selection to use. PB Blaster, Sea Foam deep creep actually stays on contact with what you spray it on, it kinda soaks into perhaps
My dad gave me this stuff called Lucy Goossy(sp) that stuff didn't work very well.
Good luck with and keep us updated.
FYI becareful when you are trying to take off your front brake lines(major PIA for me)
TexasBlazerBoy
1/2 ton status
So now that I have my lift done my turning radius has gotten worse. Do I need to adjust my draglink?
Tighten it or loosen it?
Or suck it up and be happy I have the lift done.........
Tighten it or loosen it?
Or suck it up and be happy I have the lift done.........
