CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Check this out!!!!!
- Thread starter bad larry
- Start date
Could we run them without getting the backspacing changed? Don't you have to get new pressed in or welded center? That's still hella cheap though. I want some!!!
bad larry
1/2 ton status
Yeah you can, swap to DRW front hubs and spacers in the rear, there you go.....
I have five mag run flats out of govie H1 rims in SoCal if someone buys from the website above (they dont come with the run flats)
bad larry
1/2 ton status
I'm pretty sure you can choose mag,rubber, or PVC inserts somewhere on his
website.. Also it kinda depends on your intended purpose, if your gunna run um on the street and you buy the 12 bolts w 37's, max psi is +/- 50, u don't need a run flat.. 8 bolt max inflation w the 36 RT's is something like 30/40 give or take, I consider those tires total chit, the 37's are way more bang for the buck.. But, if your gunna use them off road mostly or even a combo of on and off you can just get the PVC inserts to retain the bead.. Technically if you really want the run flats than you must really want the security of being able to " run flat" because PVC will retain the bead just the same plus it's a hell
aof a lot lighter from what I understand and if you run tires flat w the insert it chews the hell outta the center of the tire.. This is what I have read on m715 zone (I'm overthere because I have one), pirate 4x4 (unbeleveable wealth of knowlage) and so many H1 and dual rear wheel hub or spacer threads it'll make your head spin + here there's a couple threads about H1s... For 12 bolts shipped anywhere in the lower 48 for a flat rate w tires for that price it's a good deal, look at what everybody else is tryin to get for those rt2's alone...IMO, it's cheap for tires and rims ready to go.. Yeah you need to gear on your rig a little (drw hubs on the d60 and spacers or a wider 14 bolt + thinner spacers) but let's face it we're always messin with our trucks, that's y we're here.... Of course you really gotta like H1s to even b interested in a couple of mods, I am...Most of your questions can b answered on the Trailworthy website....The runflat inserts are not manditory...If you run the strait and narrow and Obey everything Johnny Law tells you than this is kinda a moot point as I believe they are not even DOT approved....
website.. Also it kinda depends on your intended purpose, if your gunna run um on the street and you buy the 12 bolts w 37's, max psi is +/- 50, u don't need a run flat.. 8 bolt max inflation w the 36 RT's is something like 30/40 give or take, I consider those tires total chit, the 37's are way more bang for the buck.. But, if your gunna use them off road mostly or even a combo of on and off you can just get the PVC inserts to retain the bead.. Technically if you really want the run flats than you must really want the security of being able to " run flat" because PVC will retain the bead just the same plus it's a hell
aof a lot lighter from what I understand and if you run tires flat w the insert it chews the hell outta the center of the tire.. This is what I have read on m715 zone (I'm overthere because I have one), pirate 4x4 (unbeleveable wealth of knowlage) and so many H1 and dual rear wheel hub or spacer threads it'll make your head spin + here there's a couple threads about H1s... For 12 bolts shipped anywhere in the lower 48 for a flat rate w tires for that price it's a good deal, look at what everybody else is tryin to get for those rt2's alone...IMO, it's cheap for tires and rims ready to go.. Yeah you need to gear on your rig a little (drw hubs on the d60 and spacers or a wider 14 bolt + thinner spacers) but let's face it we're always messin with our trucks, that's y we're here.... Of course you really gotta like H1s to even b interested in a couple of mods, I am...Most of your questions can b answered on the Trailworthy website....The runflat inserts are not manditory...If you run the strait and narrow and Obey everything Johnny Law tells you than this is kinda a moot point as I believe they are not even DOT approved....
Last edited:
1984SpartanK-5
Registered Member
I think that I just found the wheels and tires that I'm going to be running on my truck, THANK YOU for the link.
bad larry
1/2 ton status
No problem, that is flat out a good deal...
fyi i heard he will be bumping the sale price soon as he is loosing money on shipping.
get them when the price is good.
get them when the price is good.
love the 12bolt h1's ive got on my truck 
KansasTwister
1/2 ton status
are the grooved tires worth the extra? planned to order from him and get 4 maybe 5 wheels at either 3.5 or 4.5 backspacing.
bad larry
1/2 ton status
][/QUOTE]
I guess it depends on what your gunna use them for.. If ur gunna crawl around all day on the rocks w 8psi than maybe the sipes would conform a little better but those 37 run down the road awesome as is and ware real good to...
Do you have any pics of your truck here on CK5?
