close to time for gear swap help with gear brand choice

[sweetk30]

i want 5.13 gears for play toy i am building so hear is the axle specs. i have 60 frt with detroit locker 4.56 -up and corp 14ff rear hd 88-up casting with 4.10 gears stock open and detroit to go in it. want best gear that we all like and have had good luck with thanks.

 

[royjones]

Hello

randys ring pinion give them a call i got good service there

 

[sweetk30]

that helps a lot as to the brand of gear. thay supply them as a distributor . i want to know what brand is best.

 

[RootBreaker]

randys ring pinion give them a call i got good service there

that is all i did and think they gave me precision gear.... i think but dont remember.... it is going to be personal preference..... I know nothing about gears so that was my choice.. call randys and let them mail it to me .....

 

[Brocky]

Most guys I know have precision gears form Randy's Ring and Pinion. They havn't had any problems as of yet and some guys been running them for a few years now. I am running stock , but that is what I want to run. Somewhere like 4.56 up.

 

[walla2k5]

I have Precision Gear for the D60, can't find a set of 5.13's for the 14ff they're back-ordered until sometime in September.

 

[MarcS]

randys ring pinion give them a call i got good service there

Randy's were real helpful. Saved me some money too.
They recommended Yukons for me.

 

[JK5]

For a street rig...Precisions
Offroad...Yukon's.

Precision's are the quietest gears...for highway use...next to GM gears.

 

[shane74]

http://coloradok5.com/forums/showthread.php?t=144102

Clicky, I have Yukon 5.13's for sale right now.

 

[85mudblazin]

http://coloradok5.com/forums/showthread.php?t=144102

Clicky, I have Yukon 5.13's for sale right now.

Holy high price batman . I got my Yukon's for $175 to my door.

As for the question, precision are going to be the best made gears but they are also the most expensive. Yukon's are good strength for the money. I am running Yukons and havent had a problem yet.

 

[big94gmc]

I voted Yukon. I have Yukon 5.13's, and have been impressed with the quality.

 

[mudslinger99]

I guess you fellows didn't read Jekbrowns post on where he got his gears. $300 bucks for both front and rear shipped from CCOR for Yukon 5.13's..

Here is a link http://coloradok5.com/forums/showthread.php?t=141909

I know when I need to order my gears I will get them from Bobby over at CCOR

 

[JK5]

When buying rebuilding kits...be carefull of Yukon's kits...
They advertize that Timken bearings are used...wrong...
those dorks gave me Bower carrier bearings with Timken races...
so I had to purchase 2 Timkens...to finish the job right.

Precision has the best kits...with good shims to work with.