D60HP testing waters

[thatK30guy]

To see if anyone has a '78 or '79 SRW D60 high pinion front with 4.10 gears, complete hub to hub.

I have some stuff to trade for the HP.

Running complete 454

Complete 465/205 setup with EVERYTHING needed to swap.

DRW D60 with 3.73's.

12" Superlift kit, COMPLETE with everything including shocks.



What do you have? The closer, the better.

 

[1967k10]

Crap! I thought you had one you wanted to trade .

 

[thatK30guy]

Nope, thats why this is in the "wanted" forum. If I had one to trade or sell, it'd be in the other forum.

 

[jason m]

where are you located, i have one with 3.55's in MA. PM me for more info if your intersted, jason.

 

[thatK30guy]

Ewwww...3.55 ratio. Yuck!

I'm in central Kansas, BTW.

 

[JK5]

I just put a 78' up for sale. Sorry, No trades, I need the room for my lathe.

 

[jason m]

Ewwww...3.55 ratio. Yuck!

I'm in central Kansas, BTW.

ok but for 300.00 dollars that i wanted for the axle you could of put 4.10's in. sale is pending after i posted this anyways, jason.

 

[twoslo4five0]

gonna be hard to find one with 410s the majority of them are 354s...trust me i have one sitting on jackstands right now

 

[1967k10]

gonna be hard to find one with 410s the majority of them are 354s...trust me i have one sitting on jackstands right now

The 78/79 F350's I've had all had 4.10's it's the F250's that seem to all have 3.54's .

 

[twoslo4five0]

the last truck i bought was a f350 and it had 354s...just saying from experiance ive seen alot more (for sale) hp60s with 354s than with 410s...in about 6 month ive only seen 2 (one on here recently) with 410s for sale...if you plan on running something higher than a 456 might as well have a 354 gear in it because your gonna heve to run a thick gear anyway

 

[1967k10]

the last truck i bought was a f350 and it had 354s...just saying from experiance ive seen alot more (for sale) hp60s with 354s than with 410s...in about 6 month ive only seen 2 (one on here recently) with 410s for sale...if you plan on running something higher than a 456 might as well have a 354 gear in it because your gonna heve to run a thick gear anyway

OK,tell me this then. I can't figure it out. some have small studs like a D44 and a few have big studs like a GM D60 . I assume F350's have the big studs? The ones I've parted did and the f250's had small ones .

 

[twoslo4five0]

that im not sure about mine has 9/16 studs and HUGE brakes..a 16.5 wheel will barley clear...im putting chevy outers on mine

 

[1967k10]

that im not sure about mine has 9/16 studs and HUGE brakes..a 16.5 wheel will barley clear...im putting chevy outers on mine

If ya want to part with the SRW hubs my buddy and I can always use some.

 

[twoslo4five0]

If ya want to part with the SRW hubs my buddy and I can always use some.

trading them for the chevy drw outers

 

[kgblazerfive]

My two both had/have 3.54