can anybody find part numbers for a complete king pin kit. my napa story only have the taper tephlon ,with seal and gasket. i want to replace the whole thing lower bearings and all the seals. with a part number they should be able to order !
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
dana 60 king pin kit parts number
- Thread starter brian wafer
- Start date
vendor here call them . off road design
half way down page . 73 each kit complete. minus lower pin. that's reused . http://www.offroaddesign.com/catalog/Dana60frontaxleparts.htm
half way down page . 73 each kit complete. minus lower pin. that's reused . http://www.offroaddesign.com/catalog/Dana60frontaxleparts.htm
thanks! but its always kind off long too have parts sent over here in canada!!! was hoping too get parts quickly from napa or carquest. if i can,t find a part number ,i will give ORD a call! early next week,i remember replacing king pins about 2 years ago the guy said parts came from napa!
lower part # NCP 2621668 http://www.napaonline.com/Catalog/CatalogItemDetail.aspx/King-Pin-Set/_/R-NCP2621668_0343737057 also moog part #K8832
upper part # NCP 2629000 http://www.napaonline.com/Catalog/CatalogItemDetail.aspx/King-Pin-Bushing/_/R-NCP2629000_0252850935 also moog part # K6652
It does not include the spring (spicer part # 37300) or upper kingpin (spicer part # 37302)
upper part # NCP 2629000 http://www.napaonline.com/Catalog/CatalogItemDetail.aspx/King-Pin-Bushing/_/R-NCP2629000_0252850935 also moog part # K6652
It does not include the spring (spicer part # 37300) or upper kingpin (spicer part # 37302)
thanks will check it out today
!
!
def swap in the spring new . there a wear item for sure.
no parts places up in Canada like north west fab or others that sell / stock Yukon ?
no parts places up in Canada like north west fab or others that sell / stock Yukon ?
well maybe!!! thought it would be easyer and faster by napa. i do alot of buisness with them,and they are closest like 30 miles away. will make phone calls this morning,let you guys know tonight. i,m log in with there prolink system only could find the top parts. and forget about asking the counter guys
!!!
!!!
read this also for good upgrades.
http://coloradok5.com/forums/showthread.php?t=307918&highlight=king+pin
http://coloradok5.com/forums/showthread.php?t=307918&highlight=king+pin
thanks on the link! almost pm you last night had read it,but couldn,t find the tread.
what are we doing up at 4.00 o clock!!!
east coast 
7:01 am for me
sure you got your user settings correct time location for you ?
7:01 am for mesure you got your user settings correct time location for you ?
didn,t know i could adjust the time,always thought since its colorado k5 . it was colorado time
!!! east coast me too .gave all the numbers too my napa guy. was almost like asking for space shuttle parts. in a brake while waiting on a napa reply. seen sweetk30 talk about yukon gear,started surfing there web site and seen the same kit as ORD! looked for the closes shop and wouldn,t you know there was an outlet in shediac new brunswick(3 hours away). gave them a phone call, had king pin kits on hand and a master rebuilt kit for differencial. missing a yoke he was checking it out , maybe have to order it. first upper king pin came out easy ,second one used the cutting disc trick came out easy. try and get a few pictures when all the parts come in! thanks for all the help!!!
!!! east coast me too .gave all the numbers too my napa guy. was almost like asking for space shuttle parts. in a brake while waiting on a napa reply. seen sweetk30 talk about yukon gear,started surfing there web site and seen the same kit as ORD! looked for the closes shop and wouldn,t you know there was an outlet in shediac new brunswick(3 hours away). gave them a phone call, had king pin kits on hand and a master rebuilt kit for differencial. missing a yoke he was checking it out , maybe have to order it. first upper king pin came out easy ,second one used the cutting disc trick came out easy. try and get a few pictures when all the parts come in! thanks for all the help!!!
no problem
comming together slowly! all new differencial bearings and seal,knuckle bearing kit. all came from yukon gears. found a dealer in new brunswick. 
