dana 70 dually disk kit....

[SkysTheLimit]

Will this kit be available with just the flange and brackets? I've got 14FF hubs that are going on my 70HD when I swap so I won't need the one off rotors.


thx

 

[supersize75k5]

can i put 14 bolt non dually hubs on my dana 70 dually rear?

 

[SkysTheLimit]

can i put 14 bolt non dually hubs on my dana 70 dually rear?

Yes you can. It will move the WMS out to be 1/2" wider than a dually D60 front. I'm going to be running stock H1's with NO spacers needed!

Check this out:

http://coloradok5.com/forums/showthread.php?t=109482&highlight=stock+humvee+rims

I'll be doing a write up when I get around to swapping my 1 tons in.

 

[supersize75k5]

still thinking here..


i am missing all bearings, retaing nuts and everything on my dually 70..im tempted to just run the hubs off the gearless 14 bolt the buggy is riding on currently

will the locking rings, bearings and all that jazz work with the 70 housing?

thanks in advance

 

[clarkjw24]

I can't really tell from the pictures but is there enough room to run a 16" rim? Looks like there is. I'm wanting to put disk on my dually and still run the factory rims.

 

[SkysTheLimit]

I know the bearings and stuff from the center section won't but I think the hub related stuff will interchange.

Emmettology101 did the swap. Maybe PM him and ask just to be sure.

still thinking here..


i am missing all bearings, retaing nuts and everything on my dually 70..im tempted to just run the hubs off the gearless 14 bolt the buggy is riding on currently

will the locking rings, bearings and all that jazz work with the 70 housing?

thanks in advance