Dana44 Spindle? thatk30guy...you around? >>UPDATE-CALLED DANA<<

[Leadfoot]

Re: Dana44 Spindle? thatk30guy...you around?

I think the Executioner is thinking of the difference in the Banjo fitting on the calipers. If I am not mistaken they will both bolt up the same, but the stock Dana 44 caliper uses one type of banjo bolt/fitting and the Corporate 10/D60 uses another type. But if you are using your "existing" hoses with your "existing" calipers when swapping C10 to D44 or vice versa you will be fine.....but please correct me if I am mistaken.

See my rig at <a target="_blank" href=http://coloradok5.com/gallery/Leadfoot> click here </a>

 

[Stoopalini]

Re: Dana44 Spindle? thatk30guy...you around?

Give Dana's Tech Support a call, and they should be able to tell you everything about that axle with those numbers.

Dana Tech Support: (419)866-3900

Thomas.

-- '84 1-Ton Blazer --
When the goin' gets tough,
the tough go 1-Ton

 

[Jersey]

called dana...see first post again. Thanks eveyone.

- Jersey

'91K5 - 350, 700R4, NP241, FlowMasters, 33's
<a target="_blank" href=http://pages.zdnet.com/len1313/myk5>[/b]PICS[/b]</a>

 

[Jersey]

called someone else to verify dana's info, they were wrong. see top.

'91K5 - 350, 700R4, NP241, FlowMasters, 33's
<a target="_blank" href=http://pages.zdnet.com/len1313/myk5>[/b]PICS[/b]</a>

 

[502Burban]

Re: Dana44 Spindle? thatk30guy...you around?

I found the BOM on my D44 facing front. Very faint and hard to see. Just used a piece of paper laid over the numbers and rubbed with a pencil to transfer to the paper. Worked great.

Robb
'73 GMC Suburban - 502DFI
<a target="_blank" href=http://community.webshots.com/user/robbrj>community.webshots.com/user/robbrj</a>