4x4k20
1/2 ton status
i have a turbo 400 form a 86 m1008 it was bolted to a 208 . i am trying to get it to bolt to a 203 it wont it likes about a half inch what do i do cut it off rite?
Last edited:
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
delete
- Thread starter 4x4k20
- Start date
Stomis
Professional Amateur
i have a turbo 400 form a 86 m1008 it was bolted to a 208 . i am trying to get it to bolt to a 203 it wont it likes about a half inch what do i do cut it off rite?
Wait what? You wanna cut the output shaft half an inch?
If it all bolts together and splines together but its just not long enough than just get a spacer c&c'd to space it out and use longer bolts.
4x4k20
1/2 ton status
no it will not bolt up it likes a half inch so i guess i will cut that much off of the output shaft so it will bolt up to the tcase
Stomis
Professional Amateur
No make a spacer.
blueblazes44
1/2 ton status
Have had 2 cut to fit with no problems. Easy fix to fit.
I know people who have cut down output shafts with no problems.
Martin
Martin
