CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Sold Deleted
- Thread starter kennyw
- Start date
What year, 75? I'll look, I was trying to give several away for a while. Not sure if they went in the last load of scrap or not.
I forgot about these! How much shipped to 28532?
Yes a 75. Please keep me posted.
Bump
$75 for the parts plus $45 for FedEx ground
Sold...p.m.me your PayPal info
Looking for the 4L80E/NP 241c Torque rod?
I have one but not for sale. It is about 34" from the bellhousing to the center of the first hole on the tcase.
I understand why your not selling it!
Its hard to find.
I'll just have to lengthen the one from my 700r4.
But I was able to get the very hard to find Suburban 4L80E torque converter cover, it bolted right up to the trans and was able to re-use the torque rods that go from converter cover to motor mounts, I was so lucky to get it!
But Thank you for answering,
Ed
Its hard to find.
I'll just have to lengthen the one from my 700r4.
But I was able to get the very hard to find Suburban 4L80E torque converter cover, it bolted right up to the trans and was able to re-use the torque rods that go from converter cover to motor mounts, I was so lucky to get it!
But Thank you for answering,
Ed
Hey, I'm looking for a rear driveshaft, 54" center of u-joint to u-joint, 1350, approx. 3 3/8" tube. For my 84 K10 long bed, SM465, NP208.
Did you ever find the jack and associated equipment?
I have a pile of different driveshafts, I'll try to look this weekend.
It looks like I scrapped most of them.
NP. Thanks for looking.
That said, I do have this hardware on the inner fender of the 74 in my yard. $10 plus shipping and I'll pull it for you.
Deal! My zip is 92679. PM with total.
I'll get it pulled after work this week and PM you with a total.
Any luck finding that drive shaft?
I have at least one that is close.
