CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

DIY4x4 Bumper Center/ 12000# winch

Davey814

Registered Member
Joined
Apr 28, 2006
Posts
9
Reaction score
0
Location
Shelby Twp. MI
DIY4X4 Bumper center. This is brand new and has never been on a truck. $200. Bumper is in Michigan. Pictures available SOLD

Brand new in the box Tabor 12000# winch. $550
 
Last edited:
What make/year of vehicle is it for? I assume blazer, but you never know.

It should either be 73-80 or 81-87. Doesn't matter as far as vehicle as the pickup, suburban and k5 all have the same bumper mounts up front for the same year range.
 
I had this built for a 78 K5. I can take some measurements if your curious about it working for a certain year since I can't guarentee which year it does work for.
 
Looking at the way this one mounts, it uses the three bolt pattern for the factory tow hooks to mount. Since the width of the frame is the same from 73-87/91 it could be possible to drill that bolt pattern on a newer frame if the holes don't interfere with any existing holes. I'd want to hold it up to my truck and compare it up close first before making the purchase though.
 
Yes it should. Thats why i joined the site is learning from everyones knowledge. I was told that the frame rails are the same for '73-'80 for all blazer, pickups and suburbans. I had it drilled for the tabor which is made by warn. I can take measurements just to verify the winch will work for you.
 
Top Bottom