How hard is it to replace the door glass weatherstrip? Does the glass have to be removed or can the weatherstrip be sneaked out and back in with the glass in place (window down obviously).
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Door glass weatherstrip
- Thread starter 4X4HIGH
- Start date
its a little fun but should be doable with glass down and possible dorr panel off.
just had a door apart month or so ago for a power to man swap and there was lots of room.
but this was a older door and weather strip stuff was older .
just had a door apart month or so ago for a power to man swap and there was lots of room.
but this was a older door and weather strip stuff was older .
bot0611
1/2 ton status
Its easy... just rool the window down, unbolt the channels and slide them upwards, install the weatherstrip and then slide them back in.
thebluemax
1/2 ton status
http://www.youtube.com/watch?v=T3v6uZarxKA&feature=relmfu
http://www.youtube.com/watch?v=JGMKPuS1NJQ&feature=relmfu
Step by step video, hope this helps you out.
http://www.youtube.com/watch?v=JGMKPuS1NJQ&feature=relmfu
Step by step video, hope this helps you out.
K5-Kelly
1/2 ton status
Run Channels or 'cat whiskers'? I have done alot of these in our auto glass shop and can tell you it's not that bad.
Who makes good glass channel felts or whiskers? I need them for my tailgate and eventually the doors...LMC seems to only sell the channels with the stuff already in them.
