draglink help

[73redblaze]

i bought the ballistic fab crossover kit and the tie rod works perfect but the draglink hits the leafs. i dont think i have enough lift. im running stock 56's up front. is that why they sell those bent draglinks? can i use my rod ends on one of those bent draglinks? please help

 

[NorCal_Chris]

i run flat 52s with a flat draglink and have no issues....

pics?

 

[73redblaze]

i didnt take a pic. but this one connects to the tie rod hole not your knuckle

 

[73redblaze]

it is suposed to look like the 2nd pic but it does not connect to the knuckle so it wont work

 

[4X4HIGH]

That is a BAD idea.

 

[jonesalden]

I have no any idea about this thread.

 

[NorCal_Chris]

yeah that setup not so much for leaf rigs.

I dont see how you could make that work. i had my old setup off the tierod, but it was level with the tie rod. this one is above it, so im pretty sure no matter what its gonna hit your springs.

 

[Indy4x4Fab]

hay chris do u need me to post up a couple pichs of the cross over steering bought off of u? and 73redblaze if ur needing me to i can build u a set up like chris' old set up for basicly the cost of the parts.

 

[stumpbuster]

I have no any idea about this thread.

your contribution knows no boundaries

 

[Indy4x4Fab]

test post

cool it works.

 

[73redblaze]

upload a picture and let me see what you have in mind

 

[bot0611]

Who you buy it from?????

 

[73redblaze]

any pics yet?

 

[NorCal_Chris]

this is how mine was bent, but will not work with what you have. It would occasionally rub the leafs, with yours higher than this its gonna go straight into the leafs.

 

[73redblaze]

oh ok thanks for the pic. i took it to a fab shop and they are going to put a 6" bend in it for me. its a quick fix and im happy

 

[NorCal_Chris]

oh ok thanks for the pic. i took it to a fab shop and they are going to put a 6" bend in it for me. its a quick fix and im happy

right after the knuckle? sounds sketchy..... post a pic when you get it done

 

[73redblaze]

right after the knuckle? sounds sketchy..... post a pic when you get it done

this is what i will look like and it will attach like the picture. it wont be as dramatic because i dont have that big of a lift.

 

[sweetk30]

hope you got a SAFE amount of adjustment.

as the bends will make the bar shorter.

 

[73redblaze]

yea i have about 5" to play with.

 

[tRustyK5]

Why not get the correct passenger arm for your front diff and do it right? Cut corners on body and paint...go for it. Want a cheap stereo? Cool. Cheap/scary steering? I gotta say something.

Rene