What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

$E6 ~ $OE ~ $OD ~ $31 ~ $42 VE Fixer Spread Sheet

eagle mark said:
I'd like to have a copy of both if you don't mind? I've never seen one. There's none available on TP website. I was going to start one from the origanal ALDL Datastream but you may have something better to start.

I will add a history table for you on the adx that mactches the VE in the adx and daves VE fixer.
Click to expand...

Of course you can. Let me dig through the files.
 
If you guys have a TP datalog for the $85 and $4F email me them to. That way when I build the BLM history table I can test it.
 
eagle mark said:
If you guys have a TP datalog for the $85 and $4F email me them to. That way when I build the BLM history table I can test it.
Click to expand...

Somethings wrong with the .adx I posted, all the BLM's show up in the 20 Kpa column.

dave w
 

Attachments

  • Marty 03.zip
    12.2 KB · Views: 2
  • 1228747_A106.zip
    6.2 KB · Views: 1
Dave, do you have a recorded data from TP? In XDL. I can't test with excel files...
 
eagle mark said:
Dave, do you have a recorded data from TP? In XDL. I can't test with excel files...
Click to expand...

I attached some $42 .xdl files. Maybe others would like to try the .xdl files also.

dave w
 

Attachments

  • 11-25-11-04.zip
    20.2 KB · Views: 1
$42 data logs won't work in a $4F...

But I got it done and emailed it to you. Just left one dash and it's not totally set for $4F
 
Mark,

Here are the files. The zip contains both an ads and a converted adx. I never got the converted file to work correctly. Of note, it would show 3185 as the desired rpm, never showed BLMs, knock retard counts didn't work and a whole host of other info.
 

Attachments

  • 7060adsadx.zip
    19.8 KB · Views: 3
cuervo said:
Mark,

Here are the files. The zip contains both an ads and a converted adx. I never got the converted file to work correctly. Of note, it would show 3185 as the desired rpm, never showed BLMs, knock retard counts didn't work and a whole host of other info.
Click to expand...

It might be possible to use the $85 DataMaster TTS Histogram, LT Term values in the $85 VE Fixer Spreadsheet. The problem I see is the 45 KPA is not shown in the DataMaster TTS Histogram. Maybe an average BLM using 40 Kpa and 50 Kpa could be used to interpoliate the 45 Kpa BLM?

The DataMater Histogram is not copy / paste, but clicking on each cell in the histogram show the BLM average. I think clicking on each DataMater Histogram and then manually typing in the average value into the correct spreadsheet cell will greatly help tune the VE Table.

The example below is 800 RPM ~ 35 Kpa with the average BLM of 117.

dave w

$85 VE Fixer DataMaster.jpg
 
I was doing the average difference between the two cells to tune the 45kpa values. I test out the sheet later tonight.
 
cuervo said:
Mark,

Here are the files. The zip contains both an ads and a converted adx. I never got the converted file to work correctly. Of note, it would show 3185 as the desired rpm, never showed BLMs, knock retard counts didn't work and a whole host of other info.
Click to expand...
All I found in there was XLS files that look like data recordings?

I need the ads and adx files...
 
No I have 7 Zip, it's free but never had an issue before? Let me try again, they may have been assoiciated to Open Office because thats what the files say they are...:doah:
 
eagle mark said:
No I have 7 Zip, it's free but never had an issue before? Let me try again, they may have been assoiciated to Open Office because thats what the files say they are...:doah:
Click to expand...


Winzip is trial ware. You can use it without paying but it has a little annoyance timer on it when it starts up.
 
It worked fine, I got your zip and daves zip mixed up...

Do you have any data recodings done in TO with this ADX? If so I can do some work on it and test with datalog. Did you need something specific done to it?

If not thank you :bow: because it's one I don't have and I have a complete $85 system on the bench I am rewiring for a conversion.
 
eagle mark said:
It worked fine, I got your zip and daves zip mixed up...

Do you have any data recodings done in TO with this ADX? If so I can do some work on it and test with datalog. Did you need something specific done to it?

If not thank you :bow: because it's one I don't have and I have a complete $85 system on the bench I am rewiring for a conversion.
Click to expand...


Well, I can log fine with the ads and v4 but when you import the ads into v5 the logging is all screwed up. For some reason the data does not match up. No BLM readings, desired RPM set to 3185, it's pretty messed.
 
Well I don't think it was ever built right in the first place, it needs a lot of work. I'm not an expert on building these from scratch but I beleive the trans and engine need to be seperate ads or adx to start with. This one is a complete dump of everything? You don't even have a 4L80E do you?

I may try to do this $85 for engine from scratch because I have the origanal data stream. The one for the trans is probably already done...

Anyway I added a BLM history and Knock history if you want to try it and see if the tables fill.
 
Last edited:
eagle mark said:
Well I don't think it was ever built right in the first place, it needs a lot of work. I'm not an expert on building these from scratch but I beleive the trans and engine need to be seperate ads or adx to start with. This one is a complete dump of everything? You don't even have a 4L80E do you?

I may try to do this $85 for engine from scratch because I have the origanal data stream. The one for the trans is probably already done...

Anyway I added a BLM history and Knock history if you want to try it and see if the tables fill.
Click to expand...


I do have a 4L80E and I'll take a look at the files and see if they work in v5.

Thanks!
 
You must log in or register to reply here.

Latest Posts

Top Bottom