Kain
3/4 ton status
This is before so I put on 12deg before tech on compression stroke. Start in the morning to swap intakes
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Looks like side draft carburetor
Kain
3/4 ton status
Lol
Kain
3/4 ton status
Had to hook to snorkel somehow....
Kain
3/4 ton status
was all gung hoe to start working on this thing and lightning bolts put a damper in my day hope they will peter out and i can get started
Kain
3/4 ton status
Sure is pretty
Kain
3/4 ton status
When you stab dizzy point the 1 at #1 ?
Kain
3/4 ton status
Does this look right or what? Sorry I’m hot and hurting
Generally yes. You have to make sure the engine is at TDC #1 first however.
It doesn't REALLY matter where the rotor points as long as the rotor is at the correct terminal on the cap to fire that cylinder, but TDC and pointing at #1 is an easy reference that is pretty much universal.
Looks one tooth off to me. It doesn't matter IF you can rotate the distributor far enough. Usually the wiring or clearance makes rotating the distributor a bunch, difficult. That's a weird distributor, usually with GM the wiring faces the drivers side of the vehicle, but if it works as you have it, go for it.
The stud for the distributor hold down is a nice touch.
It doesn't REALLY matter where the rotor points as long as the rotor is at the correct terminal on the cap to fire that cylinder, but TDC and pointing at #1 is an easy reference that is pretty much universal.
Looks one tooth off to me. It doesn't matter IF you can rotate the distributor far enough. Usually the wiring or clearance makes rotating the distributor a bunch, difficult. That's a weird distributor, usually with GM the wiring faces the drivers side of the vehicle, but if it works as you have it, go for it.
The stud for the distributor hold down is a nice touch.
Kain
3/4 ton status
i did put on tdc and 12 deg like in the instructions
Kain
3/4 ton status
had to see if hat was going to work and the tps sensor will be close
but it looks like valve covers will work, YAY i dont have to buy new ones!!!!!!!!!!!!!!!!!!
but it looks like valve covers will work, YAY i dont have to buy new ones!!!!!!!!!!!!!!!!!!
Kain
3/4 ton status
This did come in, my locking collector bolts
Maybe now I can put these on and not have leaks
Maybe now I can put these on and not have leaks
Kain
3/4 ton status
I put the throttle kick down bracket on
Kain
3/4 ton status
Edelbrock customer service is awesome
He said I would have it today so tomorrow I will have it running ( knock on wood)
He said I would have it today so tomorrow I will have it running ( knock on wood)
Kain
3/4 ton status
Most of the wiring is in want to make a bracket to mount the ECU. I have to mount coil , mount fuel pressure regulator adjust kick down for trans
Make battery connections And hook ignition hot s
see if she fires up
Make battery connections And hook ignition hot s
see if she fires up
Kain
3/4 ton status
Got coil mounted and wired
Hooked up fuel lines and I don’t have to remake em
Went to make coil wire and the talor coil wire that I ordered didn’t have a straight boot in it so I gues to part store I go.
Hooked up fuel lines and I don’t have to remake em
Went to make coil wire and the talor coil wire that I ordered didn’t have a straight boot in it so I gues to part store I go.
Kain
3/4 ton status
It LIVES!!!!!! Started right up and ran smooth as a baby’s butt!
Kain
3/4 ton status
Time fir it’s maiden voyage
Kain
3/4 ton status
I was so excited i forgot to take pics and forgot my mask.
I have been driving around for 4 hours!
I have been driving around for 4 hours!
