What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Engine swap. which one, where, new or rebuilt?

just plain rediculous once again you guys take it personall and now you want to kick me out or knock me down a peg..... I show respect as i get it.

none of which were done by the person that built your motor for you (likely because you couldn't handle it and are a total douche).

Oh yeah and you're still a wanker.
Click to expand...

You expect me to bow down after you say something like that...



You got your opinions i got mine leave it at that.
 
dirtwarrior17 said:
yet your dedset that i got screwed. YOu would defend your **** the same way.

I figured by telling you that i was 17 you would realize that I want to listen to advice to get help for my truck... telling me i got screwed is not help..:rotfl:

I got pissed because you act like you have my whole swap and motor in pictures and have seen whats inside of my motor, know how it runs, and think it's 35 years old.
Click to expand...

i'm not gonna say you got ripped, never did... your motor may end up running like a raped ape, congrats.. not the combo of parts i would have chose, but whatever, thats your choice..

what i will tell you is at this point it seems your biggest issue is being inexperienced. hopefully you'll get thru your repower without that hurting you..

btw, i've let many of your posts slide that wheren't the best advice in the world. think before ya hit that reply. :wink1:

oh, and btw, a thank you every now in then would do wonders..

my suggestion is to seriously drop this thread before you piss people off even more and use it as a learning experience for your future postings...

after noticing your edit just now.... the manifold? see, here's your prob, you can't admit to yourself that you dont have much experience and made a mistake.. first of all, any decent mechanic is gonna now immediately if they're handed an aluminum bolt, i certainly would... and it certainly shouldn't be snapping at those torque specs... its a f*ck up, admit it, learn from it and remember next time...
 
The bolt on the intake broke because it was aluminum... my brother grabbed it and handed it to me...if thats not knowing how to install an intake then yeah i don't know how to install and intake....
Click to expand...

IF i said my truck is the **** and im the boss i got split personalities....

This is my first truck and im stoked thats all im saying. My family has never had a rig like this and i've wanted one exactly like this one since i was 12. I got it and i did it without physical help... that is a lot more than most everyday teenager can say. I don't care if you think i think my truck is the baddest **** on the planet. Never said anything like that. I know 75 percent of the rigs on here are the same or 20 times beefier and burlier. I came here hoping for what ryoken just said not telling how i ****ed up. Just wanted to hear from guys who have wrenched on **** and done this before that it my motor has good components and should run good for a long time. It's not easy to build a high hp motor for 23-2500. I JUST got done doing it and wanted to let mini mull know how i did it.
 
[Flame on!]:angry1:
Alright already!!!!!!!!!!!!!!!! Listen squirt...

NO ONE CARES ABOUT YOUR FLIPPING MOTOR!!!!!!!!!!! You keep responding about "my heads! my heads! my heads!!!!! they make 2 bazillion HP if they want too!!!!!!!!! NO ONE CARES ABOUT YOUR ENGINE OR WHAT IS IN OR ON IT!!!!!!!!!
Shut up about your dang engine already!!!!

THe reason why no one likes you is because first you recommend something idiotic to put in a family burb and then carry on about how you know it all and hav figured out how to build engines and EBAY is the best machine shop ever and the world wide corporation known as FLIPPIN' General Motors doesn't know their butt from a hole in the ground when it comes to crate engines because you know it all and have figured out how to do things better than all the egg heads who are on the frontier of engine building.....yep...you beat them all.....you're 17 and smarter than all of them....you know everything.....all hail buttwarrior17, king of everything. :rolleyes: :surepal: :rolleyes:
[/Flame off!] :angry1:
 
But jumping around like Little Billy Bad-ass isnt the way to go around here
Click to expand...

:haha: :rotfl: :bow: :saweet:

very nice.... and unfortunately true.... thanks, that made me chuckle...
 
wow.....

:whistle: :thinking: :haha:
dude you got to settle down. NEVER SAID ANY OF THAT NEVER WANTED THAT. I WAS looking for someone who is experienced that could tell me if my stuff ok or not. you took it personal just like every post on here.

you are bringin up stuff that was never said or you just interpreted it wrong. don't know how many times i said ebay is a good way to get screwed and only listed my **** the first time because i looked for a year on the cheapest way to put some hp under the hood of the blazer. The second, third, etc etc etc because you straight said im a dumbass and got screwed... or 84 said.

idc.

I said i would go with the 427 that is a hp crazy kid talkin.. the next post i said SHE should go with the vortec.
 
dirtwarrior17 said:
IF i said my truck is the **** and im the boss i got split personalities....

This is my first truck and im stoked thats all im saying. My family has never had a rig like this and i've wanted one exactly like this one since i was 12. I got it and i did it without physical help... that is a lot more than most everyday teenager can say. I don't care if you think i think my truck is the baddest **** on the planet. Never said anything like that. I know 75 percent of the rigs on here are the same or 20 times beefier and burlier. I came here hoping for what ryoken just said not telling how i ****ed up. Just wanted to hear from guys who have wrenched on **** and done this before that it my motor has good components and should run good for a long time. It's not easy to build a high hp motor for 23-2500. I JUST got done doing it and wanted to let mini mull know how i did.
Click to expand...

fine dude, i understand your very excited about it.. hope it turns out well.. but you have to understand where we're coming from, RJF just told you exactly whats going on.. we're tired of you bringing up specs in every thread.. bragging, excited, whatever.. everyone on the board has noticed...

i'm trying to help you here man... seriously, bow out of this thread with some decency and learn from it...
 
These guys could out wheel you with a HORSE AND BUGGY. You can always look on the bright side, if you sell your camel hump truck for a horse and buggy, at least then youd have a freind . Mabey they have a horse and buggy on e bay. You could be a real Biwwie Bas Ass then. Oh yeah .


X1
 
That's the best advice I've seen yet. Your being given a respectable out Dirtwarrior.

I've made mistakes on this site too, I'm sure everyone has said something they regret here at some point.

Just let go of it and move on. :waytogo:
 
dirtwarrior17 said:
dude you got to settle down. NEVER SAID ANY OF THAT NEVER WANTED THAT. I WAS looking for someone who is experienced that could tell me if my stuff ok or not. you took it personal just like every post on here.
Click to expand...
Yet another version from him of what happened ;)
 
wtf.. seriously wtf...

.
I don't care if you think i think my truck is the baddest **** on the planet. Never said anything like that. I know 75 percent of the rigs on here are the same or 20 times beefier and burlier.
Click to expand...

goddam. Now you tell me i got no friends.... jesus how long do you want this to go on. I got about 20 phone numbers that are disagreeing with you.

this is pointless. they keep comin.

YOu want me to say i ****ed up....... i ****ed up...... end this.
 
hi pinion said:
You can always look on the bright side, if you sell your camel hump truck for a horse and buggy, at least then youd have a freind . Mabey they have a horse and buggy on e bay.
Click to expand...
:rotfl:
 
No,,,

i said you should go wheel a horse and buggy.

Dude, you need to get "broke" in, if you want to be part of the tigh knit club. I got broke in, Rjfguitar got broke in, everyone else got broke in. Now its your turn. LOL . Instead of fighting everyone, backing yourself into a corner with your camel hump head crap, just chill. Hopefully ,,,after a LLOOONNNG break in, youll be sailin". One thing my grandpa used to say......." Sometimes the best thing to say, is nothing at all." Sooner or later , this thread will be long gone. Put your little peter away and just chill it. Youll do just fine. Dont forget to be nice,its a long hard lesson youre going to learn sooner or later.Think about what you say before you say it. You are stirring the pot. Add your peice with intelligence,and move on. Were not finished with you yet young man:D

Ive seen it a million times with new members. You have to conform to US though, not the other way around, Later, Jacob:grin:
 
You must log in or register to reply here.

Latest Posts

Top Bottom