CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
everyone loves flex pics!! urban crawlin shhhh
- Thread starter obijuan
- Start date
oh god i love it!! i used to have 37 SSRs and i thought those were noisy lol!
the bouncing up and down and the noise is friggin awesome.
the bouncing up and down and the noise is friggin awesome.
This might be a stupid question. On your front springs, they look like they are seperating. My 8 inch springs have clamps around the springs. Did you take yours off the front of the spring? I notice the clamp on the back of the front spring, but what about the front spring?
By the way, that rig is BAD ASS!!!!!!!
By the way, that rig is BAD ASS!!!!!!!
thanks man! these are skyjacker (prob the cement truck application) and thats just the way they came. truthfully, im probably not gonna mess with it.
it is close, but not that close. either way it has already been secured to the shock and i still gotta figure a way to hold the hydro hoses as well.
If you aren't using the Ford towers are your shocks limiting droop? I would imagine they have to be close with that much down travel. Mine are 15" with 10" of that down and I can get close.
Get some towers on there and see what it does!
Also is your tire rubbing under the rad support. It looks like it has to be in the picture from the front stuffed side.
Get some towers on there and see what it does!
Also is your tire rubbing under the rad support. It looks like it has to be in the picture from the front stuffed side.
i dont think they are but i really gotta flex the hell out of it, in the pics they werent maxed out. i was all the way up the wall there.
and yeah its really close to the inner fender at the core support, but i am at least two inches taller than you so i dont think it will be that bad. it will rub but its smooth under there lol.
and yeah its really close to the inner fender at the core support, but i am at least two inches taller than you so i dont think it will be that bad. it will rub but its smooth under there lol.
Yeah mine rubs under there even with the bumpstops dropped 4" from stock. My front springs never go past flat.
K10 KRAWLER
1/2 ton status
Wow, it looks Great!!! Is that front bumper center a one piece design for your Spring mounts?
yeah its the abomb that came from one of our members brains here, built by the man kert at DIY4x.com. its a winch bumper with balla shackle mounts and its the B52s as well as a new body mount holder thing. all in one heavy, bolted to the frame like crazy, beefer sullivan, awesome creation. built to order basically, its exactly how i wanted it.
K10 KRAWLER
1/2 ton status
Well, I think ill have to send him a PM that looks sooo sweet!
give him a call, thats a good way to get hold of him.
it was very reasonable, and heres how it looks new ooooooh aaaaaah
heres the approach angle with it all the way forward and his 1.5 forward ez inch.
it was very reasonable, and heres how it looks new ooooooh aaaaaah
heres the approach angle with it all the way forward and his 1.5 forward ez inch.
K10 KRAWLER
1/2 ton status
i agree!!Dead secksy pic!
You need to put the rest of those wheels on/together.
baddass!
LOL, I see it now. Most of the pics look like plain black beadlocks but the pic of the rear tire ramped looks like you have a lone blue rock ring on the left rear. I see now they all have it, without the reflection the others are just hard to see.
ohhh lol yeah i see, they totally sucked. theyre so damned heavy now. im glad thats over with. everything seems to be going good, i think im ready to have a shakedown run soon.
pretty much ready to wheel for this season, then after that in winter time its a tbi BBC swap.
pretty much ready to wheel for this season, then after that in winter time its a tbi BBC swap.
79bonanza
1/2 ton status
whats that whinch bumper called on diy4x, cuz i cant find it on any of there pages is it not on there yet or what
