wildmandave
1/2 ton status
i have a 1980 blazer with a Edelbrock Performer carburetor and intake. it floods outs on hill and dies, runs great on the flats. any ideas? 
thanks Dave
thanks DaveCK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
flooding out edelbrock carburetor
- Thread starter wildmandave
- Start date
Those are great carbs, but angularity is their weak point.
Try lowering the floats a little.
If that doesn't work well enough then I suspect that you'll need to get creative with modifying the bowl vents. You'll want to extend them up as high as possible. Not on that carb, but on others I've used J-B Weld and 1/4" Brake/Fuel tube to do this.
Try lowering the floats a little.
If that doesn't work well enough then I suspect that you'll need to get creative with modifying the bowl vents. You'll want to extend them up as high as possible. Not on that carb, but on others I've used J-B Weld and 1/4" Brake/Fuel tube to do this.
