Front spring bushings, f/r extended brake lines, drop pitman arm

[four_by_ken]

Title says it all.

I have a set of front springs... but need new bushings.

Need a set of extended brake lines for a 4 inch lift.

Need a drop pitman arm for a 4 inch lift.

 

[thatK30guy]

title says it all.

I have a set of front springs... But need new bushings.
what brand of springs? Skyjacker and superlift require different bushings than the other brands.

need a set of extended brake lines for a 4 inch lift.
i have one front and one rear braided lines. One is new and the other is used. Would have to measure them to make sure they'd fit. Otherwise i'm asking $25 for both. Just need to find another front line.

need a drop pitman arm for a 4 inch lift.
what front axle are you running? If its the d44 or 10bolt, get a raised steering arm. It'll be cheaper in the long run and will keep your draglink parallel better than a drop pitman arm would.

...

 

[obijuan]

ive got the dropped pitman arm for a 4x4 box.

 

[owenst7]

I have a 4" raised steering arm for a Dana 44/10 Bolt if that's what you have. It's a little chewed up at the top of one of the cone washer tapers, but the mating surface and tapers will still work fine.

Think I read somewhere that 88-98 2x4 brake lines are good for extended lines you could get at the parts store.