Front u joint

[bigchief427]

I need the part number (preferably auto zone) the front joint at the axle has inner snap rings and i can't find on one that doesn't have external snap rings

 

[84_Chevy_K10]

The front joint at the front axle will not have internal snap rings.

 

[az-k5]

Are you referring to the axle shaft or the drive shaft? No drive shaft joint for the front yoke end has internal rings, at least from what I have seen.

 

[84_Chevy_K10]

Nope, they all use a Spicer 1310 from the factory, part number 1-0153 in Neapco. (external rings)

 

[bigchief427]

Well who knows what front driveshaft is in it. IT IS a 81 k10 pickup i have put a dodge dana 60 and a 14bltff. the front driveshaft does not have rings for the external snaprings i thought that they were just missing put then i found the inner snaprings. ok so all the "right" joints per napa the zone, advanced and post yer part # are all wrong the cross is to big to fit in the end of the shaft. And the caps are to big to fit in the holes. hmmm i found a joint laying around for my rear shaft and the cross and the caps are a perfect fit BUT external rings hmm hard tellin were the shaft came from BUT that what is in the truck and yes it is on an auto trick with a cv at the t-case

 

[bigchief427]

[ QUOTE ]


[/ QUOTE ] Stock Saginaw S44, internal clips, 2-3011 Fits front saginaw style CV and rear driveshafts on 10 bolt equipped rigs with auto trannies

 

[84_Chevy_K10]

[ QUOTE ]
[ QUOTE ]


[/ QUOTE ] Stock Saginaw S44, internal clips, 2-3011 Fits front saginaw style CV and rear driveshafts on 10 bolt equipped rigs with auto trannies

[/ QUOTE ]

REAR driveshafts, yes.

ALL front pinion joints on our trucks are spicer 1310s, not saginaw.

 

[ugly_blazer]

[ QUOTE ]
dodge dana 60 /forums/images/graemlins/deal.gif

[/ QUOTE ]

Would this make a difference? The Dodge's used internal snap rings...

 

[bigchief427]

dude i pulled that qoute from the post yer part# that you posted. Ok so i need a 1310 with inner rings i guess . and the dodge dana 60 seems to match up fine i bought a new yoke for it from and randys ring and pinion

 

[84_Chevy_K10]

There is no such thing as a 1310 with inside clips unless it is a wheel joint.

Spicer style u joints use external locking clips.

I'd double check your driveshaft.

Dodge Dana 60 will use a 1310 or 1330, no matter what, your pinion joint should use external locking clips.

 

[bigchief427]

i think i've figured out how to make it work for a while till i upgrade to 1350 or so I will take a pic soon to show that this is what is on the truck it beats the holy hell out of me what it is

 

[ford_assassin]

[ QUOTE ]
Nope, they all use a Spicer 1310 from the factory, part number 1-0153 in Neapco. (external rings)

[/ QUOTE ]

1-0174

Its lists as a 1310 too, what is the difference?


Thanks!!