Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE Membership sticker when you sign up for a Premium Membership and choose the recurring plan.

FS/FT ~500HP 468 or Trade Diesel/700R4 or $1500

Discussion in 'Engine | Tranny | T-case' started by bigblock454, Oct 5, 2005.

  1. bigblock454

    bigblock454 Clack Clack Clack Premium Member

    Joined:
    Jun 18, 2002
    Posts:
    580
    Likes Received:
    58
    Location:
    Terre Haute IN
    Build(s):
    2
    Guys, I think I want to either sell my 468 Chevy or trade it for a 6.2/6.5 and 700R4 combo. This setup is currently in my 1980 Olds Cutlass Drag car, you can drive and do a huge burnout in my driveway for proof it runs great.

    468
    Balanced
    10 to 1 Compression
    Large oval port heads (2.19x1.88 valves)
    Edelbrock Performer RPM intake
    800 Holley Double Pumper
    Full Fulcrum roller rockers (Crowder not cheap aluminum)
    Pete Jackson Noisy Gear drive
    CAM 224/224 @ 0.050" 0.530 Lift Solid Lifter (idle to 5500)
    MSD Distributor
    All accessories including power steering
    Chrome oil pan and valve covers

    I am wanting either $1500 complete from carb to pan with accessories or a complete running 6.2 with 700R4. A complete turbo engine would be even better, or perhaps a complete rust bucket truck?

    Andy
     
    Last edited: Oct 7, 2005
  2. J.R.

    J.R. Guest

    how many miles or passes are on the motor? whats in it for cam, and rods, I or H beam or stock rods? do you have a build sheet for it?? thanks
     
  3. bigblock454

    bigblock454 Clack Clack Clack Premium Member

    Joined:
    Jun 18, 2002
    Posts:
    580
    Likes Received:
    58
    Location:
    Terre Haute IN
    Build(s):
    2
    OK, here goes, from memeory.

    Stock crank and rods. Rods have ARP bolts and were resized
    Crank is 10 under and polished
    Pistons are Hyperutetic raised dome (.110 I think)
    Entire assemply balanced
    Crowder full fulcrum roller rockers
    CAM is solid, 224/224 at 0.050 530 lift (power band from idle to 5500) I have some pictures of it pulling the drivers side front tire on my 1980 Cutlass!
    Heads are either 781s or 079s, Large oval with 2.19 1.88 valves, rebuilt when I installed them.

    Engine has maybe 1000 street miles and maybe 20 1/8 miles passes as I have yet to use up one set of slicks. The engine has been together for about 5 years allways garage kept.
     
  4. bigblock454

    bigblock454 Clack Clack Clack Premium Member

    Joined:
    Jun 18, 2002
    Posts:
    580
    Likes Received:
    58
    Location:
    Terre Haute IN
    Build(s):
    2
    Forgot, has noisy Pete Jackson gear drive also.
     

Share This Page