GM60/14FF, axles, drivetrain...

[RGV72BLAZER]

*Front 12" leaf springs
*Rear 8" leaf springs
Both of the above come with bushings, never used, not even removed off the pallet that they were shipped on, and they are made for a 73-87 GM--$500 for the set

**GM Dana 60, 4.10s, missing the passenger side hub, have spring plates, new u-bolts from superlift, great condition. GM 14Bolt FF, gear ratio unknown, complete, 40 1/2" spring perch to perch meaurement--1400
*D44 3.07s, open, discs, needs wheel bearings---100
*gm 12 bolt 3.07s, posi, drums, ring & gear great cond.---100 obo
*SBC 350, needs rebuild but was running before pulled---500
*th350--200 obo

Stuff off of my '72 Blazer
*4WD steering box
*sbc starter
*misc. a/c parts
*spring brackets
*steering column with steering shaft and wheel
*f/r stock driveshafts in great condition
*Gen 1 HardTop

*Trades: rockwells, 'mogs, complete 454, 700R4

*pm or email @ [email protected] located in Harlingen TX shipping on your dime or could possibly help with shipping...depending on your location...

thanks David

 

[RGV72BLAZER]

ttt

 

[b454rat]

Is there any way that you would sell the posi and gears out of that 12 bolt rear?? I have the rear already, but I need a posi, and have the gears, too. Don't need the axle, and would be cheaper too. And what year is it??

 

[RGV72BLAZER]

it's out of my '72. but i'd rather sell the whole thing together. have no use in parting it & keeping junk. sorry. ttt

 

[b454rat]

Out of a 72 will bolt into my 62 burban. Damn. Just for the hell of it, can you check on shipping to 13904??

 

[RGV72BLAZER]

well the 12 bolt really isn't that heavy, maybe ~300 lbs, & i'd have to estimate about $250 for shipping, but i'd have to strap it down to a pallet and all to get an exact amount. but i could maybe help out with that. let me know if you're REALLY interested & i'll get an exact amount. thanks.

 

[b454rat]

All I really want is the posi out of it, but then it will bolt in my 62. I should have that up and running in a few weeks. The axle I have now for it needs at least drums, reweld the perchs, etc. Would be nice to have some that bolted in for a change. Gonna pass on it for now, I have too much money going out right now, and not enough coming in. It's still in the brain working around, I'll let you know if I ever figure out what I'm gonna do. TTT for yah.

 

[RGV72BLAZER]

ttt

 

[fabjunkie]

Will 4:10's work with that carrier?

 

[RGV72BLAZER]

with which carrier??

 

[fabjunkie]

Sorry, the 12 bolt.

 

[RGV72BLAZER]

i think the carrier break is @ 4.10 so i think the 4.10s will work with the carrier. maybe you can ask around. where in texas are you? i could probably help you with shipping. let me know.