I have a 86 Blazer with a mild built 350. Does anyone know where the vacuum line goes to off the distributor?? Does it go to the carb? Thanks for any info.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Help!
- Thread starter TEAMROPER
- Start date
Emmettology 101
3/4 ton status
Yes, should go to one of the side or front ports on the carb.
Thanks, Mike
Emmettology 101
3/4 ton status
Anytime. It's been a while, but I think I always had mine on the passenger side of the carb towards the front on a Q-jet. 
ntaj*ep
1/2 ton status
Put your finger over the port on the carb. while at idle, if vac. is present find another port. You want vac. off idle not at idle (ported supply)
cool thanks guys. I will give it a try.
Any susgestions would be a great help. Who makes the softest riding leaf springs for a 86 chevy blazer around a 6" lift 36" tires 350 motor??
mciahpv
Registered Member
Don't know about the 6", but I had Rough Country 4" on mine for a long time with 38s and they rode very well.
I seem to remember them being reasonably priced as well, but that was several years ago...
Good Luck
I seem to remember them being reasonably priced as well, but that was several years ago...
Good Luck
