CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Howdiymobile....
- Thread starter howdiy
- Start date
y5mgisi
1 ton status
LOL! Cool video! j/k but good job.
I'm going for an Emmy
Yep felt good
I don't like how it sounds with open headers though.
I'm gonna see how much it is going to cost to get two pipes bent a little to clear my transfer case tomorrow. I hope my spintech mufflers sound good
After putting my mufflers on, sounds better in person
The secondary's won't kick in so it just falls on it's face when you get on the throttle, I'm just gonna put a double pumper on
http://www.youtube.com/watch?v=0ImTvGd-3lk
http://www.youtube.com/watch?v=Mp3CN_Mig_U
The secondary's won't kick in so it just falls on it's face when you get on the throttle, I'm just gonna put a double pumper on
http://www.youtube.com/watch?v=0ImTvGd-3lk
http://www.youtube.com/watch?v=Mp3CN_Mig_U
you have some serious body roll there! 
btw engine sounds awsome
btw engine sounds awsome
y5mgisi
1 ton status
Sounds awesome!
What carb are you using?
Holley 870 street avenger
I fixed it, it was a vacuum leak. I had to plug the hole.
The carb still isn't anywhere near perfect but at least all 4 barrels are working
I also realized how good my truck sounds after hearing it again, I'll have to get another video that is better
I fixed it, it was a vacuum leak. I had to plug the hole.
The carb still isn't anywhere near perfect but at least all 4 barrels are working
I also realized how good my truck sounds after hearing it again, I'll have to get another video that is better
Yes I've played with the springs and such
I have another problem now though, after I rev up my engine it takes a long time to get back to idle. And also my idle mixture screws aren't working
I think my rear butterflys are too far closed, and my front is open too much. I need to take my carb off and adjust them
I have another problem now though, after I rev up my engine it takes a long time to get back to idle. And also my idle mixture screws aren't working
I think my rear butterflys are too far closed, and my front is open too much. I need to take my carb off and adjust them
y5mgisi
1 ton status
Q-Jet time!
GMC1977
1/2 ton status
Link to website that sells that kit?
Haven't really done much, just been driving it more
I need to fix my pinion angle still, I've been getting a bad vibration under acceleration, I raised my carrier bearing and it helped some but I still need to shorten my upper bars.
Heres a video at idle, sounds better than the others, this time it actually is making more power
http://www.youtube.com/watch?v=TqLo_m5ispU
I need to fix my pinion angle still, I've been getting a bad vibration under acceleration, I raised my carrier bearing and it helped some but I still need to shorten my upper bars.
Heres a video at idle, sounds better than the others, this time it actually is making more power
http://www.youtube.com/watch?v=TqLo_m5ispU
Back to reality, no tube buggy. It's been nice driving my truck around.
I gutted my interior today, the back is gonna get hacked as soon as I get room for my truck inside. We are taking the boat home soon
I need to make a new bumper and new tube rockers, A tube bender may be in the future, we will see, otherwise its gonna be poo pipe.
I need to get these tires of the street bad, the spool is wearing them out fast Probably 1/8" less tread in the back than the from from less than 100 miles
I have access to 8 hummer wheels and tires so I'm going to bringing 4 of them home soon. The process seems easy I just need to borrow a plasma cutter. $45 per pressed center is a great price.
And I still need to put the truck on the lift and shorten my upper bars, the vibration took out my pinion seal and it now leaks. My driveshaft is also bent and vibrates some.
I gutted my interior today, the back is gonna get hacked as soon as I get room for my truck inside. We are taking the boat home soon
I need to make a new bumper and new tube rockers, A tube bender may be in the future, we will see, otherwise its gonna be poo pipe.
I need to get these tires of the street bad, the spool is wearing them out fast Probably 1/8" less tread in the back than the from from less than 100 miles
I have access to 8 hummer wheels and tires so I'm going to bringing 4 of them home soon. The process seems easy I just need to borrow a plasma cutter. $45 per pressed center is a great price.
And I still need to put the truck on the lift and shorten my upper bars, the vibration took out my pinion seal and it now leaks. My driveshaft is also bent and vibrates some.
y5mgisi
1 ton status
That will be a vast improvement im sure!
