walla2k5
1/2 ton status
Sold.
Last edited:
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Hydroboost * GONE*
- Thread starter walla2k5
- Start date
Would it work on my "84 K20? It's got a 6.2, manual tranny.
will it work with a 350, or does it need to be diesel?
It will work with either one... the question is, do you have the right pump on the 350? All the diesel's came with hydroboost and the correct pump. If you don't have the correct pump (two return lines) you can just put a "T" fitting in the return line instead.
walla2k5
1/2 ton status
Thanks for clearing that up, Kenny.
will this work with Blazer pedals?
walla2k5
1/2 ton status
If I remember right, the pedal rod was about 2" shorter, than my '80 K30 pedal rod. Your's may differ...
Could always mod the pedals.
i think the pump is the same, the reservoir is the only difference.
Hydroboost pumps have 2 return lines is the only difference.
walla2k5
1/2 ton status
Bump
PM sent.
walla2k5
1/2 ton status
You know, you want it....
Interested, Would the master cylinder work on my '89 C 3500 and will the hydroboost work on my '84? Mostly concerned with bolt pattern and fitting thread and size.
walla2k5
1/2 ton status
I don't know about cross applications, but as a matched set it's ideal. Flare fittings on the unit. "I think" '80 ,was the change over year, from o-ring to flare on the fittings.
walla2k5
1/2 ton status
Ttt
