CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

I LOVE my Suburban, but...

Status
Not open for further replies.
Tim,

YOUR STUPIDITY IS SHOWING.

@sshole!

Like I need VALIDITY FROM YOU or any other YAHOO. Suck my exhaust. OR send me your email and I'll send you pix of my BULLSH@T truck. With the custom interior, 350 V8 with multiple upgrades, etc. You want examples? Custom burned JET CHIP. Accel super coil, Accel Dist cap, Accel rotor, 8.8mm wires, Performance distributors 8-pin Dyna Ignition module (the Accel ignition control module interfered with the jet chip - didn't figure THAT one out until I burned TWO Accel modules out), two K&N filters, TBI spacer, front and rear sway bars, heavy duty starter, tranny rebuilt to handle MINIMUM of 700 HP. Custom exhaust with turbo cat and Caddy muffler (flows better than a Flowmaster and twice as quiet). Custom interior of FOUR captains chairs with my company logo and name embroidered on them. Dual AC, custom steering wheel, XM radio that needs to have it's amps (approx 400 watts) and additional speakers (minimum of ten sets plus sub) selected and installed.

Trying to decide if I keep this one which engine upgrades I'm doing. LS7 maybe? Or just rebuild with full race parts like fuel injection (replaces current TBI), Lunati crank, Keith Black pistons, iron heads (better reliability), custom made headers and maybe Gale Banks Twin Turbos, custom additional ten gal gas tank (also has 40 gal tank) to hold race gas when I BLOW THE DOORS OFF OF UNSUSPECTING MORONS LIKE YOU.

BUT no, your too full of BULLSH@T to actually put your email where your mouth is. What a bunch of CR@P you spout!

And yes, if you WERE street racing back in 1971 & 1972 adjusting SOLID mechanical lifters every Friday night WAS a must, if you wanted to earn gas & date money for the following week. Which is HOW I got my money. On Friday NIGHTS, teaching idiots like you what REAL LIFE and street racing was all about. Perhaps you need the "What it takes to be a man" speech I give to punks these days.

Oh, born in 1953. So in 1972 I was NINETEEN. Bite me you whimp.
 
Last edited by a moderator:
wallew said:
Tim,

YOUR STUPIDITY IS SHOWING.

@sshole!

Like I need VALIDITY FROM YOU or any other YAHOO. Suck my exhaust. OR send me your email and I'll send you pix of my BULLSH@T truck. With the custom interior, 350 V8 with multiple upgrades, etc.

BUT no, you too full of BULLSH@T to actually put your email where your mouth is. What a bunch of CR@P you people spout!

And yes, if you WERE street racing back in 1971 & 1972 adjusting SOLID mechanical lifters every Friday night WAS a must, if you wanted to earn gas & date money for the following week. Which is HOW I got my money. On Friday NIGHTS, teaching idiots like you what REAL LIFE and street racing was all about. Perhaps you need the "What it takes to be a man" speech I give to punks these days.

you've got a serious attitude prob dude... you sound like your 12... you come on this forum and start laying stuff down that smells like spam, the guys had every right to question its validity...

then you start on a tirade how noone here knows anything and your some god of street racing.. "corvette hunting", please, your sooo cool... my Chevelle would eat your sh*t for lunch probably....

you have no clue how badass some of the trucks here are... i can see how much you know by bragging about your 4 captains chairs... yeah, real important on a 4x4.... how bout some 1 tons, crossover, hydro and real mods? hell your prolly running front lift blocks.. you list a bunch of stupid bolt on ignition stuff, ooooh, impressive.... btw, thanks for letting us know a 350 is a V8...

i could write pages on how much of a douche you've come across like in this thread.... but its not worth it.. don't let the door hit ya in the ass on the way out...

oh, and e-mails are in the profiles genius....
 
Come on over to Denver and LETS SEE who's RIDE is the badest. Of course, I'll have my mechanic tweak it just a bunch BEFORE we go to the strip. His hobby? He drag races with a 7000 hp dragster. We see eye to eye.

F@CK YOU
 
hmmm... so you give us a line of a bunch of bolt on crap on your engine, and a bunch of bs interior upgrades. yeah, your truck is more badass than any of ours here. :rolleyes: what do you have for a drivetrain behind that monsterous TBI fed engine? oh yeah, street racing is retarded...
 
Don't let one bad exposure to this site prejudice you. There are alot of great people here. My first car: 66 Galaxie, 425hp/427, toploader, 9 inch with posi, ate clutches, rearends and trannies.Got a 440 sitting in back right now. Giving it away to a guy in Kansas, when he can make it out here to pick it up. Mike
 
Arent Pinzos British? I know the mogs are Benzos and German but i thought for some Pinzos were British built and designed.:confused:

But if i had the cash i would whant one, Pinzos are cooler than Mogs in my book becouse thier 6x6s:cool1:
 
wallew said:
Come on over to Denver and LETS SEE who's RIDE is the badest. Of course, I'll have my mechanic tweak it just a bunch BEFORE we go to the strip. His hobby? He drag races with a 7000 hp dragster. We see eye to eye.

F@CK YOU

oh yeah, well i'll have my big brother beat up you! learn to tune your own stuff like the rest of us, then maybe someone will take you seriously.
 
I'll HAPPILY send you pictures of my CUSTOM INTERIOR of my Suburban. FOUR SUBURBAN captains chairs (with arms) with MY COMPANY NAME AND LOGO EMBROIDERED ON THEM, RUBBER FLOORS because I get it DIRTY and tons of mods most of you yahoos don't even KNOW.

Go ahead, e-mail me your pics with your "custom" interior and mods that none of us would ever know about. Ill even host them and post them here in this thread, because apparently we could all learn a ton from your God-like knowlege of upholstry embroidering and bolt on ignition parts.

[email protected]
 
popcorn.gif
any one have a coke
 
Thanks, my mouth was start'in to get a little dry:thumb:
 
what an @ssmuncher....i think everyone and their brother on this site can do all your sh!tty bolt ons in our garages. then will we be as cool as you or do we have to be old and act like a 14 year old too? list some real mods to your junk and then you might get some respect. oh yea and mods we "dont even know about/havent heard of"? sweet what kind of mods are those....somthing like how you did some "super custom" bolt on helper leaves? or maybe some totally kick-@ss cat back exhaust that you dont even need to weld cause its so custom :waytogo: maybe we should just bow down to your awsomeness :bow:
 
wallew said:
With the custom interior, 350 V8 with multiple upgrades, etc. You want examples? Custom burned JET CHIP. Accel super coil, Accel Dist cap, Accel rotor, 8.8mm wires, Performance distributors 8-pin Dyna Ignition module (the Accel ignition control module interfered with the jet chip - didn't figure THAT one out until I burned TWO Accel modules out), two K&N filters, TBI spacer, front and rear sway bars, heavy duty starter, tranny rebuilt to handle MINIMUM of 700 HP. Custom exhaust with turbo cat and Caddy muffler (flows better than a Flowmaster and twice as quiet). Custom interior of FOUR captains chairs with my company logo and name embroidered on them. Dual AC, , XM radio that needs to have it's amps (approx 400 watts) and additional speakers (minimum of ten sets plus sub) selected and installed.
How cute. Some cute wittle upgwades for your cute wittle twee fittie.

I bought all the ignition crap you have (Proform instead of Accel) at my local Napa auto parts retailer. :rolleyes: My K5 is mild compared to some of the badass trucks here at CK5 and my K5 would eat you for lunch.

I'm very impressed with your drivetrain and stuff non of us have even heard of ( :rolleyes: ).....even though I have a built 406SBC that actually has internal mods beside cute little ignition boxes and colored wires. The TH700R4 crazy mods? Yeah, got all those too.....two years ago. Custom 4" drivelines that go to 3/4 ton running gear. (thats not stock). I am also digging your custom 400 watt stereo.....I've got dual Arc Audio (that would be a higher end brand) amplifiers that combined push over 1,500 watts.

custom steering wheel
:haha: You were definantly digging at the bottom of the barrel for that one....


Sit down and shut up old man. You obviously typed in the wrong address on the internet, the site you were originally looking for was www.Ineedmymeds.com

Have a nice day.
 
wallew said:
Come on over to Denver and LETS SEE who's RIDE is the badest. Of course, I'll have my mechanic tweak it just a bunch BEFORE we go to the strip.
:bow: YOu are the master check book mechanic, I bow to you. :bow:


















:rotfl:
 
boy this thread is comedy.


is this dirtwarrior17's dad? :rotfl:





just kiddin bro, your more mature than this douche
 
Status
Not open for further replies.

Latest Posts

Top Bottom