Wanted ISO transfer case 4x4 switch

[Blue85]

The connector part on mine is messed up. I can't seem to find a new replacement for the NP208. It has the ball on the end and a 2-pin weathepack connector.

 

[imiceman44]

The connector part on mine is messed up. I can't seem to find a new replacement for the NP208. It has the ball on the end and a 2-pin weathepack connector.

I have a couple of 208 cases I will look

 

[TreeFarm]

Should be the same switch for 208 as the 231 and 241/2 and so on. I actually need to find one at the junk yard to convert my dodge from vacuum operation

https://www.oreillyauto.com/detail/c/standard-ignition/engine-sensors---emissions/engine-switches/four-wheel-drive-indicator-light-switch/53ab4fb759db/standard-ignition-2-terminal-4wd-indicator-light-switch/std0/tca25

 

[Blue85]

I thought I found some difference with the O'Reilly one. I may have to order it and find out.

 

[campfire]

I thought I found some difference with the O'Reilly one. I may have to order it and find out.

Did you get this resolved?

I think I have a spare switch here, if you still need one.

 

[Blue85]

No, I'm still running the old switch, with silicone over the gap.

 

[campfire]

No, I'm still running the old switch, with silicone over the gap.

Bummer. Turns out I was wrong, my spare switch has part of the plastic section broken off. Oh well...

 

[Blue85]

Looks like I can get this from RockAuto now for $36, unless somebody has one laying around.

 

[85-K5Blazer]

Go to Torque King ... for these parts as well .

I bought mine from RockAuto As well ... it was Standard Model TCA25 and it was $26.79 at the time plus shipping.


Switch, O-Ring, and Pig Tail ... The Switch and O-Ring worked perfectly ... I bought the pigtail but ended up not having to use it.

QU11050 NP208, NP231J, NP241 Transfer Case Indicator Switch

QU11050 Indicator Switch for Dodge and Jeep NP208, NP231J, and NP241 transfer cases without CAD. USA-made genuine OE part screws into the front case half.

torqueking.com

QU10800 O-Ring, Transfer Case Switch or Poppet Plug for NPG, NVG

QU10800 transfer case o-ring for vacuum switches, poppet plugs, or speed sensors. Exact-fit replacement for New Process and New Venture transfer cases.

torqueking.com

QU90002 Male Double Terminal Pigtail for Weatherproof Switches

QU90002 male double terminal pigtail for weatherproof switches. 22" 16-gauge wires for NV4500, NV5600, and NP205 indicator switches. USA-made.

torqueking.com

 

[jimmyleetn]

There is a NOS one on eBay for $$$$$$$$