LED light

[4X4HIGH]

Ok, where can I find some of those small LED lights that you drill a small hole and push it into the hole and it is pre terminated with wires already? I need some in a few different colors for my gauge build to use as a high beam indicator, brake light, turn signal indicators and SES light.

 

[CherryK5]

radioshack. They have them in green yellow red blue and white. And they're 12v so no resistors

 

[lectric80]

Radio Shack online is your friend. I think the hardest for me to find was blue, but green, red, and yellow were all readily available.

Edit: ^^^^^^He beat me by seconds.

 

[4X4HIGH]

Ok, care to give me a link because I looked at www.radioshack.com and couldn't find them.

EDIT: After another quick search I did find them but they don't have a blue one.

 

[K85 Octane]

http://www.orvac.com/

maybe, I have one of their stores near me and they have soooo much stuff, it's awesome. Might be able to get what you need.

or superbrightleds.com maybe, not sure

 

[lectric80]

Blue was the one I had the issue with finding as well. My thought was to use the old blue plastic lens from the gauge and attach it inside a simple white LED if I couldn't find one.

 

[ryoken]

Blue Seas make real nice pigtailed LED's, they're what i run in my breaker panel... but alas, no blue...

 

[K5dreamer]

superbrightleds.com is gonna be getting my business here in a bit. plan on replacing all but my headlights with LED's.

 

[oakknight]

quick dogpile search came up with these:
http://www.wiringproducts.com/contents/en-us/d106.html

http://www.delcity.net/store/Pigtail-LEDs/p_4934.a_1

http://www.superbrightleds.com/cgi-...ge&category=PCB&Page2Disp=/specs/wiredLED.htm

 

[sweetk30]

http://12voltguy.com/web/index.php?...ategory_id=18&option=com_virtuemart&Itemid=43

 

[Doc Feel Good]

I use to go to www.halted.com

They are in santa clara off of central expessway

 

[4X4HIGH]

Ok, just ordered up some LED's from www.wiringproducts.com and a couple rolls of wire as well.

 

[lectric80]

Nice, all 4 colors in one size and the 1/2" diameter should work well for my plans to put symbols on them.