bigbadchev84
1/2 ton status
does anyone know of a good write-up of installing a lockrite locker in a dana 44?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
lock-rite install??
- Thread starter bigbadchev84
- Start date
I installed mine on a 12 bolt rear just using the instructions they supply and it was dead easy.
I can see it being a bit more involved on the front 44 though as (I think, depending on ratio) you'll have to pull the carrier to remove the ring gear which in turn would allow you to remove the centre pin.
I can see it being a bit more involved on the front 44 though as (I think, depending on ratio) you'll have to pull the carrier to remove the ring gear which in turn would allow you to remove the centre pin.
bigbadchev84
1/2 ton status
i have a lockrite that was given to me, the problem is that it is still in a dana 44 ford axel, with 4-10s i am wanting to put it in my chevy 44 with 4.56s
Thunder
3/4 ton status
you can get an online install manual here:http://www.richmondgear.com/03form.html
