What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

looking for aftermarket seats

Okay so here is the Final Veridict. I need a new seat not the bracket after all. When I was able to finally wrendh the seat out, the frame on the seat had actually broken and not mounting bracket. sooooo I am not going to be on the lookout for just a new seat. Which means I am going to be going aftermarket afterall. I want to thank everyone for their input.
 
Okay so it has been a little while but I decided to get the Corbeau Moab seats in Neoprene Black. I bought a set for the front. I only have the driver's side seat in and forgot to take before and after pics but I will snap some pics and post them sometime today.

Thanks to everyone for their input.
 
you could put a lawn chair in for less weight and 15hp at minimun. i think the brackets would match up:D
 
Sqeejo said:
Okay so it has been a little while but I decided to get the Corbeau Moab seats in Neoprene Black. I bought a set for the front. I only have the driver's side seat in and forgot to take before and after pics but I will snap some pics and post them sometime today.

Thanks to everyone for their input.
Click to expand...
pics!!!!:D

bot0611 said:
I might suggest not going for aftermarket bucketseats.....i bought a pair of corbeaus and recieved them torned up, also they are nasty when gettin on or off of my truck, my ass hurts.......i went for good old blazer seats
Click to expand...
Where did you get them from and what model did you get?
 
NEK5 said:
pics!!!!:D

Where did you get them from and what model did you get?
Click to expand...

I got them from racingseatsusa.com They are the corbeau Moab seat. Here is a pic of the driver side installed. I have to get more pics.

CorbeauPassenger.jpg

CorbeauDriver-Installed.jpg

CorbeauDriver-Installed3.jpg

CorbeauDriver-Installed2.jpg

CorbeauBracket.jpg
 
If you don't mind me asking, what did those run you? Also, did you build the mounting brackets? I looking for new seats also.

Thanks,
Ray
 
RAY said:
If you don't mind me asking, what did those run you? Also, did you build the mounting brackets? I looking for new seats also.

Thanks,
Ray
Click to expand...


No problem. I actually bought the brackets pre-made from the same sight. A little pricey at 100 for each bracket, but saved me tons of time building them. The seats themselve ran 200 each and another 50 each for the neoprene. They have Vinyl at no extra charge for the 200.
 
NEK5 said:
what model PRP's are those?
Click to expand...

From their website.
Premier High Back
- 31" Tall X 22" Wide X 26" Deep (view seat dimension guide)
- Mounting Area: 14" Wide X 18" Front to Back (view frame information)
- Slotted for 5 point harness with 1slots in headrest
- Optional flip cushion
- Optional removable cushion
- Available 2" wider
- Available 4 " taller



They are the wider and taller. I like the wide part, but I won't buy the taller one again. They don't fit in a truck cab, but the shorter ones will.
 
Is the 22" the standard width, then with the extra wide, comes 24", or is the 22" the extra wide?
 
PERFECT!

Too bad for my passengers, as all I can afford right now is the driversside, as I still have other junk to buy :crazy:
 
You must log in or register to reply here.

Latest Posts

Top Bottom