y5mgisi
1 ton status
Good to know about the spindle bearings, interesting stuff with the pump, and nice organization!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Lost and Found - LS3 6L80 NP205 Full Frame Off
- Thread starter mattrains
- Start date
mattrains
MRAINS
I got one side of my disc conversion done. Halfway through a but stripped out and took me forever to sawzall it off.
I'll do the other side tomorrow.
The Summit kit is great. Comes with everything you need in one box. All you need to do is shim the caliper.
I'll do the other side tomorrow.
The Summit kit is great. Comes with everything you need in one box. All you need to do is shim the caliper.
mattrains
MRAINS
So I bought some new Warn hubs for my front axle and of course I had to tear them down and off to the powder coater first this Monday
I don't mind the gold but the Chrome has to go!!
I'll probably just go 100% black on black unless they don't think they can do the gold piece.
I don't mind the gold but the Chrome has to go!!
I'll probably just go 100% black on black unless they don't think they can do the gold piece.
mattrains
MRAINS
Accidentally bought some new rear seats for the Blazer on Ebay last night. Anyway, I really like the format of the seats. I didn't know they made a third row seat with the map/cup holders integrated but each seat is independently tumble and fold so it should be pretty awesome once they are installed.
Here's a pic
Here's a pic
Those do look neat.
y5mgisi
1 ton status
Look very neat! What are they out of?
mattrains
MRAINS
2007 Suburban 2500 special order 3rd row console seats.
Not impossible to find but harder than the basic flat third row.
Not impossible to find but harder than the basic flat third row.
mattrains
MRAINS
Make a huge grab today at a new "U Wrench" salvage yard.
My buddy and I walked up on the only square body on the lot and turns out its a 100% intact diesel. So I grabbed the brake booster and the radiator along with some other odds and ends.
The truck was in perfect shape and everything came off so easy.
I also found 3 full float 14 bolt rears and a Dana 60 rear. All for 100 bucks each.
The booster ran me $12 and the $400 radiator cost me $32. I'm a happy camper.
My buddy and I walked up on the only square body on the lot and turns out its a 100% intact diesel. So I grabbed the brake booster and the radiator along with some other odds and ends.
The truck was in perfect shape and everything came off so easy.
I also found 3 full float 14 bolt rears and a Dana 60 rear. All for 100 bucks each.
The booster ran me $12 and the $400 radiator cost me $32. I'm a happy camper.
Did you get all the hardware that went with that radiator. If it is bigger then what you had you will need everything from it, even the fan shroud would be different.
mattrains
MRAINS
I got all of the mounting hardware but I will use electric fans so I didn't get the shroud.
Accidentally bought some new rear seats for the Blazer on Ebay last night. Anyway, I really like the format of the seats. I didn't know they made a third row seat with the map/cup holders integrated but each seat is independently tumble and fold so it should be pretty awesome once they are installed.
Here's a pic
Those seats look real good.
I have been sitting on the bench version for my truck a long time now, but haven't put it in. I hope you post up some good pics of your install.
mattrains
MRAINS
Ive been swamped at work lately but I finally got by the powder coater to pick up a bunch of stuff. Check out my warn hubs all blacked out. They turned out better than I hoped.
I also got my cross member back to test fit. It turned out really nice and fits with plenty of room for the trans pan.
I also got my cross member back to test fit. It turned out really nice and fits with plenty of room for the trans pan.
mattrains
MRAINS
Firewall almost done.
Why were you so concerned about the transfer case crossmember looking factory if you are going to smooth the firewall? What are you going to do for heat and air?
Martin
Martin
I love smooth firewalls
y5mgisi
1 ton status
I a factory fan myself. But the smooth firewalls do look clean.
y5mgisi
1 ton status
Damn! Selling houses really pays the bills!
mattrains
MRAINS
Finally got the axles under it.
Have I said I have an LS3 in my Camaro and I flippin love that engine. I want an LS3 in my truck BAD
mattrains
MRAINS
I got the cross over steering installed. Still have to take it apart for powder coating but its nice to see it together.
