Lots of stuff

[cybrfire]

I have quite a selection of stuff stored away that I need to start sifting through and thinning out. I'll be at blazer bash so if you need something that would normally suck to ship and plan to attend let me know.

Transmissions, transfer cases, some axles around, doors, fenders, hoods and so forth.

 

[MNorby]

got any ~42" tires that are good enough for a spare?

 

[KansasTwister]

good condition 8.5 10 bolt 4.10 gears

 

[cybrfire]

got any ~42" tires that are good enough for a spare?

Sorry, no 42's.

 

[cybrfire]

good condition 8.5 10 bolt 4.10 gears

This one has a good chance. I'll take a look.

 

[lak2004]

dana 60? 52" rear springs?

 

[Kjunky5]

SM465 to NP203 adapter and matching range box?

 

[Wicked Wolf Auto]

any good tailgates?

 

[cybrfire]

dana 60? 52" rear springs?

I have both of these. PM me.

 

[cybrfire]

SM465 to NP203 adapter and matching range box?

Sorry, no go on this one.

 

[cybrfire]

any good tailgates?

I believe there may be one or two. Define good? I'll look into this today.

 

[Blue87K5]

You have a good set of front 10 bolt backing plates?? I also need a set of Warn locking hubs (6 lug Corporate 10 bolt). And just for ****s and grins, you got a set of Chromoly axles for said front 10 bolt. Thanks

Donnie

 

[obijuan]

spicer lockouts? i know your shop truck has em

 

[cybrfire]

good condition 8.5 10 bolt 4.10 gears

Still looking into this one. We had a 3/4 ton come through our hands a while back. Don't remember what happened to the front axle but believe it was 4.10's.

 

[cybrfire]

You have a good set of front 10 bolt backing plates?? I also need a set of Warn locking hubs (6 lug Corporate 10 bolt). And just for ****s and grins, you got a set of Chromoly axles for said front 10 bolt. Thanks

Donnie

Searching for this axle.

 

[cybrfire]

spicer lockouts? i know your shop truck has em

Might have some of these. Couple sets of lockouts around just don't know what kind they are.

 

[buffblazer]

any interior pieces

 

[Wicked Wolf Auto]

I believe there may be one or two. Define good? I'll look into this today.

no dents, rust or cracks on top?

 

[KansasTwister]

Still looking into this one. We had a 3/4 ton come through our hands a while back. Don't remember what happened to the front axle but believe it was 4.10's.

No rush man. Already got one set of gm's for the front of the k5, gonna need another if i ever decide to put 4.10s in the camaro though.

 

[greatwhitez71]

any 52" springs with lift?