Lots of stuff

[Meen Green]

Do you have a pass drop NP241 with mech speedo?

 

[cybrfire]

any 52" springs with lift?

There are some lift springs around. Not sure if fronts or rears. Have to check.

 

[cybrfire]

Do you have a pass drop NP241 with mech speedo?

No pass drops.

 

[cybrfire]

No rush man. Already got one set of gm's for the front of the k5, gonna need another if i ever decide to put 4.10s in the camaro though.

Found the axle. Not sure if it's 4.10's yet.

 

[cybrfire]

any interior pieces

Yes, lots of them.

 

[cybrfire]

You have a good set of front 10 bolt backing plates?? I also need a set of Warn locking hubs (6 lug Corporate 10 bolt). And just for ****s and grins, you got a set of Chromoly axles for said front 10 bolt. Thanks

Donnie

Got the backing plates and the locking hubs. No chromo's.

 

[cybrfire]

no dents, rust or cracks on top?

Forgot to look at these.

On a side note, if you guys have the time to call I can take a look at things while we're on the phone and let you know what's available right then and there. I get kinda busy and forget to look at stuff till I get home.

 

[cybrfire]

spicer lockouts? i know your shop truck has em

Obi, got some pics of one set today. PM me your email and I'll send them over.

 

[bot0611]

Any rear shackles?? stockish ones or similar

 

[Blue87K5]

I shot ya a PM. Thanks

 

[buffblazer]

Yes, lots of them.

im looking for front manual door panels and the rear inside quarter panels in blue.

 

[cybrfire]

im looking for front manual door panels and the rear inside quarter panels in blue.

I'll take a look.

 

[KansasTwister]

did ya ever check those gears?

May be interested if they are 3.73s for the right price.



Also, have any dodge 208 cases with the fixed yoke? I think its a direct swap but was looking to convert my np208 or 241 into a sye on the cheap by using the shaft and output shaft. (i think it all swaps in no problem, the dodge may have a more heavy duty chain if i remember reading that)

 

[cybrfire]

did ya ever check those gears?

May be interested if they are 3.73s for the right price.



Also, have any dodge 208 cases with the fixed yoke? I think its a direct swap but was looking to convert my np208 or 241 into a sye on the cheap by using the shaft and output shaft. (i think it all swaps in no problem, the dodge may have a more heavy duty chain if i remember reading that)

no, I haven't checked them. Been pretty swamped since returning from the bash. Might be able to get to it this week yet.

Kert

 

[kicker30]

x2 on the Dodge or Jeep NP208s and what about hydro clutch stuff?

 

[cybrfire]

did ya ever check those gears?

May be interested if they are 3.73s for the right price.



Also, have any dodge 208 cases with the fixed yoke? I think its a direct swap but was looking to convert my np208 or 241 into a sye on the cheap by using the shaft and output shaft. (i think it all swaps in no problem, the dodge may have a more heavy duty chain if i remember reading that)

Gears are 4.10's. PM inbound.

 

[cybrfire]

x2 on the Dodge or Jeep NP208s and what about hydro clutch stuff?

I don't have any Dodge or Jeep parts.

No hydro clutch parts left. All gone. Sorry.

 

[cybrfire]

I'd like to kill this thread and start posting up items individually. Hopefully that will keep things a little bit more clean as far as getting replies to everybody on the things that are for sale.

Thanks guys.

 

[Indy4x4Fab]

odd ball question but do u have a blue drivers side rear crew cab door arm rest? and do u have any diesel wiring harness we just need the engine side and the fuse block side, and if u can swing it a matching steering colum. pm me back please thanks.