Wanted LWB 1/2 Ton truck rear spring hangers and supports.

[handloader90]

Mine are rusted pretty bad, LMC wants $100 each for the spring hangers and $20 each for the supports.

Does anyone have a set that has been cleanly removed?

 

[skunked]

LWB are different than SWB?

 

[handloader90]

I doubt it. I know blazer, burb and truck are different. I just out LWB in there just in case.

 

[handloader90]

Got some?

 

[skunked]

Got some?

had some, went to scrap last month. Somebody was making these, it was either DIY4X or TNA.

 

[handloader90]

They both make them.

I was hoping for just a stock pair that somebody had.

 

[handloader90]

I could buy the DIY4X ones for cheaper than the LMC pieces by far.

 

[skunked]

I could buy the DIY4X ones for cheaper than the LMC pieces by far.

that was point before you bought stock stamped ones....

 

[Babaganoosh]

I have the factory forward hanger is this what you want?

 

[handloader90]

I have the factory forward hanger is this what you want?

Yes!

The actual hanger that was riveted onto the outside of the frame rails and also the supoorly that rivets to them.

 

[handloader90]

that was point before you bought stock stamped ones....

I'd love to have the DIY4X or TNA ones, could use some 63" springs with them but if I can get some factory take-off's for pretty cheap then that's good by me.

They hold up well, I know most guys are rocking the stamped stock ones mine are just rusted out to the point that I can literally see light shining through the metal in some spots, specifically where the bolt for the spring eye runs through... that "pocket" where you put the nut on the bolt was filled with big chunks of flaky rust, knocked it all off and the metal is extremely thin in some spots due to how much was lost to rust.

 

[nvrenuf]

1/2 & 3/4 ton are different from 1 ton.

 

[handloader90]

It's a 1/2 ton frame.

 

[Babaganoosh]

It's a 1/2 ton frame.

I have the ones you need already pulled off the frame. They are 4wd hangers so they are taller then the 2wd.

 

[handloader90]

Awesome. Could you PM me a price and pics when you get a chance please.