Many, many parts wanted

[Fife]

I have an '87 Blazer that needs quite a few parts. Lets see for starters, I'm wanting to trade my topper with sliding windows for a topper with hard/solid windows. I need a reciever hitch, new rear bumper, new tailgate, new RL taillight assembly/housing, and quite a few interior and exterior pieces. I'm also looking for a 4" or bigger suspension lift, if you have any of this for sale let me know. I'm located in Cheyenne, Wyoming. I'm willing to travel but I'm on a 16 year olds budget so traveling too far is out of question. Thank you in advance. I also need new front right and left fenders. Let me know.

 

[kennyw]

I have taillight assemblies for both sides. $25 shipped for each side. I'm just not sure what you mean by RL?

 

[Fife]

I meant Rear left haha my bad but alright I'll bite. PM me all the info I need to buy.

 

[Indy4x4Fab]

ive got a set of front and rear bumpers for sale. $60.00 for both shipped. i would like to sell them to gether. i also have the backing plate that the tail lights screw to ill threw in for free if u take both bumpers other wise $10.00 for both backing plates.

 

[kennyw]

I have him covered with the taillight parts... I included complete assemblies in my price even though only the lenses were pictured.

 

[imiceman44]

Lets see for starters, I'm wanting to trade my topper with sliding windows for a topper with hard/solid windows. I need a reciever hitch, new rear bumper, new tailgate, new RL taillight assembly/housing, and quite a few interior and exterior pieces. I'm also looking for a 4" or bigger suspension lift, if you have any of this for sale let me know. I'm located in Cheyenne, Wyoming. I'm willing to travel but I'm on a 16 year olds budget so traveling too far is out of question. Thank you in advance. I also need new front right and left fenders. Let me know.

What year is your truck?
I have a set of fenders from an 83 (81-91) are the same.
They are clean no rust, they were on a truck with big tires and they cut the corners to clear the tires with no lift.
I will get you pics, but I want $35 a piece and I will deliver for free to cheyenne, you just have to meet me at the Flying J or the Loves truck stop, I also can give you a solid window for the topper, you will need to get the other side and that way you don't need to switch toppers.
The glass is free.

 

[Fife]

Alright today I went to the junkyard today and found the housing for $5 so I no longer need the housing but indy has me on the bumper and ice has me on the fender. kenny has me on the right side mirror. And I'm still looking for everything else, especially a tailgate. Thanks everyone.

 

[tRustyK5]

I have a piar of solid topped windows for $free...but distance/shipping would suck. They're easy to swap.

Rene

 

[imiceman44]

I have a piar of solid topped windows for $free...but distance/shipping would suck. They're easy to swap.

Rene

I already offered one for free delivered.
I just have one side left, he needs the other.
I will find out tomorrow morning which side I have.
I could even help with the install, I usually spend some time in Cheyenne, WY waiting for my loading time.

 

[Fife]

I wouldn't need too much help installing. My dad's pretty big into K5's, he even used to be on here. Some of you may or may not remember him, his username was Moabdadc22. But I'll shoot both of you a PM.

 

[ilblazn86]

what kind of interior parts are you looking for. I have seat and other items. Just let me know.

 

[mudboggink5]

Alright today I went to the junkyard today and found the housing for $5 so I no longer need the housing but indy has me on the bumper and ice has me on the fender. kenny has me on the right side mirror. And I'm still looking for everything else, especially a tailgate. Thanks everyone.

I have a tailgate. Im in Jersey though. I could get it on a pallet for you. I also have interior trim peices and visors. dash pad, seat belts. All BLUE

 

[jeff in co]

Do you have a pic of your topper? Are yours tinted? I have a solid one that I'm going to be swapping out for a slider one and it might work for you.

 

[Fife]

Well guys, I got everything except fenders and interior pieces looking for the topper and carpet still, topper must be white with solid windows. Also looking for a swing away tire carrier, took some pics today too guys

My K5 pics

 

[kennyw]

If you don't hear from me, send me a reminder. I've been doing too many things at once and keep forgetting to measure that mirror.

 

[jeff in co]

Well guys, I got everything except fenders and interior pieces looking for the topper and carpet still, topper must be white with solid windows. Also looking for a swing away tire carrier, took some pics today too guys

My K5 pics

Cody, I may have a top for you. I am getting another one shipped in. Once I get it, my solid glass one will be for sale. It does have tinted windows but they are aftermarket and I would assume they could be scraped off. I'll let you know when I get the other top.

I am thinking about keeping my lift with 35's but still haven't made up my mind. I'll give you first dibs though if I switch down to 2.5" lift.

I will need to road trip to Cheyenne too someday. Have to deliver a dining room table to my aunt in Cheyenne.

 

[Fife]

That sounds good Jeff, your K5 looks pretty sweet haha I want to redo mine in white and do a complete restoration on it

 

[imiceman44]

Well guys, I got everything except fenders and interior pieces looking for the topper and carpet still, topper must be white with solid windows. Also looking for a swing away tire carrier, took some pics today too guys

My K5 pics

I should have taken the fenders with me last week.
Now I am getting loads to slc instead of Denver .
I will see how I can get them to you .

 

[clhenry]

Still in search of parts?

How are you still standing on parts needs? I'm parting out an 81 that would match up with lots of the 87 parts. I'm sheet metal poor, but wiring , glass and much more. Located in Glenwood Springs CO

I have an '87 Blazer that needs quite a few parts. Lets see for starters, I'm wanting to trade my topper with sliding windows for a topper with hard/solid windows. I need a reciever hitch, new rear bumper, new tailgate, new RL taillight assembly/housing, and quite a few interior and exterior pieces. I'm also looking for a 4" or bigger suspension lift, if you have any of this for sale let me know. I'm located in Cheyenne, Wyoming. I'm willing to travel but I'm on a 16 year olds budget so traveling too far is out of question. Thank you in advance. I also need new front right and left fenders. Let me know.

 

[imiceman44]

How are you still standing on parts needs? I'm parting out an 81 that would match up with lots of the 87 parts. I'm sheet metal poor, but wiring , glass and much more. Located in Glenwood Springs CO

I think he sold or is selling his blazer after recieving a Bronco from his father.