What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Michigan CK5-ers...

goldwing2000 said:
Probably just much as an injury lawyer. ;)
Click to expand...

Have you been talking to TJ???? Did he tell you about the time I caught my k5 on fire at the dunes? Ask lawrence I installed a new starter without breaking my truck or his...lol
 
BlazaBlazeII said:
Hey Metrodps - Could I bring my laptop and download the CUCV disk?

That was really cool for you to offer that up...

Thanks,

Bill
Click to expand...

As promised here is what I have on CD. I will make copies for anyone who is coming for ribs and wants one.

CUCV fact sheet giving F.A.Q.s

Roscommon Equipment Center Project NO.2 Wiring Conversion on Military Vehicles
June 1998; 19 pages

Roscommon Equipment Center Newsnote #10 Conversion of M1008 and M1009 Electric Systems to 12 volt
January 1999; 10 pages

Roscommon Equipment Center Project NO.62 Converting the M1009 Blazer to Cab and Cargo Box style
April 2000; 18 pages

Contents – Military Installation and parts number for Winterization Kits CUCV Truck & Bus Group
260C84 Part number 1559942; 133 pages

DA FORM 2404, Apr 79 Equipment inspection and maintenance worksheet (two sided work order)

TB 43–0209 Color, Markings, and Camouflage Painting of Military vehicles, Construction equipment and Materials Handling Equipment
31 October 1990

LO 9–2320–289–12 Lubrication Order M1008, M1008A, M1009, M1010, M1028, M1028A1, M1028A2, M1028A3, M1031
12 pages

TB 43–0213 Corrosion Prevention and Control; Including Rust proofing Procedures for Tactical Vehicles and Trailers
4 December 1990; 226 pages

TB 9-2300-422-20 Security of Tactical Wheeled Vehicles
27 August 1988; 17 pages

TM 9-2320-289-10 Operator’s Manual for M1008, M1008A1, M1009, M1010, M1028, M1028A1, M1031
4 July 1986; 185 pages

TM 9-2320-289-20 6-8 Service Rear Differential including Shaft Remove / Install 6-8 Rear Axel Shaft Replacement (All Except M1009) * Deals with the rear drive train and suspension
29 pages

TM 9-2320-289-20 Unit Maintenance Manual for M1008, M1008A1, M1009, M1010, M1028, M1028A1, M1031
20 January 1988; 940 pages

TM 9-2320-289-20P Unit Maintenance Repair Parts and Special Tools for M1008, M1008A1, M1009, M1010, M1028, M1028A1, M1028A2, M1028A3, M1031
1 May 1992; 724 pages

TM9-2320-289-34 Intermediate Direct Support / General Support Maintenance Manual for M1008, M1008A1, M1009, M1010, M1028, M1028A1, M1031
12 January 1989; 1024 pages

TM9-2320-289-34P Direct Support and General Support Maintenance Repair Parts and Special Tools List for M1008, M1008A1, M1009, M1010, M1028, M1028A1, M1028A2, M1028A3, M1031
Supersedes TM9-2320-289-34P 9 February 1990
May 1992; 1038 pages

TM17-003 Diagram of tail gate and its parts over 86 items and their numbers (jpeg format)


Thinks about selling on eBay :haha: :haha:
 
jekquistk5 said:
Have you been talking to TJ???? Did he tell you about the time I caught my k5 on fire at the dunes? Ask lawrence I installed a new starter without breaking my truck or his...lol
Click to expand...

Yea and he was laying on rocks the size of grapefruit! :crazy:
 
Hey, since I have everybody's attention, what about planning a trip to the Mounds?
Say... next weekend (10-11) or the one after (17-18)?

Think it over. We can discuss it Saturday. :D
 
Hey I was wondering if anyone has a vent tube for a dana 44, the one that press's in on the housing.
 
Supreme70 said:
Hey I was wondering if anyone has a vent tube for a dana 44, the one that press's in on the housing.
Click to expand...

Just tap it out to 1/4" NPT and use a standard brass pipe fitting. That's what I did.
 
i know i won't be able to make it to the mounds, im shooting for the beginning of april to get my truck wheelable. i may not have a new front bumper and my winch on yet, depends on the funds and time.

Mike, i may have a vent tube in a d44 housing. if you want i can try to get it out with out destroying it and bring it saturday.
 
Hey Lawrence If its not too late I would like a copy of:
TB 43–0209 Color, Markings, and Camouflage Painting of Military vehicles, Construction equipment and Materials Handling Equipment
31 October 1990
 
I will burn four copies and bring since you are only one who asked but I am sure someone else will want one too *looks at boggerless
 
3/4s?
Are you talking about axles (since I see in your sig you have 10-bolts)?

I've got a line on a set of 4.10s in Port Huron right now. Waiting for the guy to get back with me and tell me if it's a FF or a SF in the rear.
If it's a FF, it's mine. :shame:
If it's a SF, are you interested?

Also, I know where you can get an entire '87 3/4 pickup with 4.10s (SF in the rear) for probably $100.
 
Supreme70 said:
Hey I was wondering if anyone has a vent tube for a dana 44, the one that press's in on the housing.
Click to expand...
we found out today that a vent tube from a np-205 will fit in a dana 44.even if it is 13 degrees out.:haha: :haha:
 
goldwing2000 said:
No need to apologize!

Turns out the rear is a SF, so I'm out. If you want the front for $100, it still has 4.10 gears.

Have you seen my thread (with prices and part numbers) for front 10-bolt 8-lug conversion?

$250 in parts for all new stuff.

http://coloradok5.com/forums/showthread.php?t=175604
Click to expand...

I'll take the front.. if its for free
any chance you can get it to the boneyard this weekend???


Thanks if ya can pm me or give me a call

517-902-3103
 
Think we should call and ask for them to save the center tables for us? so we are in a semi group. I would say 13 people we can add a chair or two if needed.
Dam! I am hyped on this like a 15 year old on a date with a High school Cheerleader. >:-P
 
It would probably be a good idea to resever the center tables. I will be cool if everyone can bring there ride, I know Im trying like hell to have mine there.
 
You must log in or register to reply here.

Latest Posts

Top Bottom