mounting ideas? will this belly pan mounting work?

[BranndonC]

this look like the best way to mount my belly pan/side plate? the top bolt will be mounted on the flat part and away from rocks, as will the side bolt

 

[85mudblazin]

Maybe im just retarded but I cant figure out your drawings

 

[BranndonC]

the 2 squares are 2x2 1/4 wall square tube welded together to make a strong 2x4, the C looking thing on the right is my frame, the part under it is my skid plate/belly pan, and the piece connecting the skid plate and square tubing is just a side piece

 

[85mudblazin]

Ow ok so you are going from the rocker to the frame to the belly skid??

 

[captaininsano]

Maybe im just retarded but I cant figure out your drawings

I think I am a retard too...

 

[pauly383]

I got it . The piece that touches the rocks will have holes drilled for the bolt to pass through , the socket for removal can pass though it too . the bolt holds the bent part on the backside to the sliders and frame

 

[Greg72]

You could make your life a lot easier by building that upper mounting flange a little longer and mounting that bolt from the inside instead.

It will sit flat that way, and won't get "massaged" by rocks.