Name this locker....

[blazen91]

It has spider gears and some beefy springs. No little gov lock gears inside. Not alot of info, any ideas? Pics will help.

<font color=red>Land use issues are the heart of our sport.
Get involved or lose the sport.</font color=red>

 

[84_Chevy_K10]

GM posi!

Tim
'84 Chevy K10, lifted, loud, fast, and 3/4 ton axles

 

[Twiz]

Standared limited slip. There should also be some clutch packs behind the side gears. What diff is this? What year?

Regadless, The springs preload the clutch packs to (for example) 300 ft/lbs, past that, the axle shafts will slip past each other. They do wear-out, and the pre-load "loosens" up. But thats the genneral idea.

Twiztid
This is all about opinions, and this is mine. (if applicible)

Opps, not ft/lbs, it should have been, lbs per sq inch.<P ID="edit"><FONT class="small">Edited by Twiztid on 08/09/01 10:30 PM.</FONT></P>

 

[Mudstud]

I ain't got the slightest idea! Good luck.

Stuck is a state of mind!

Mudstud
76K5 sb400/350/203parttime/3.73-D44/GM12 locked