Need 1/2 door pics & Ideas

[BlazerBoy]

I have any old set of doors off my donor k30, I am going to hack them up and make them 1/2 doors. Last summer I modified my regualar door hinges so the doors are removable, so I be able to swap these doors very easily. I would love to see some pics or even hear your ideas, thoughts or things you would do if you were making a set. Thanks

BlazerBoy
<a target="_blank" href=http://www.geocities.com/generalblueballs/>http://www.geocities.com/generalblueballs/</a>

 

[laketex]

hmmm...did you even think about doing a search??? There's a cool little button up top so we dont' have to ask the same questions over and over...Try it out, it worked for me and I came up with this:

<a target="_blank" href=http://coloradok5.com/forums/showflat.php?Cat=&amp;Board=blazer4x4&amp;Number=149261&amp;page=&amp;view=&amp;sb=&amp;o=&amp;vc=1>http://coloradok5.com/forums/showflat.php?Cat=&amp;Board=blazer4x4&amp;Number=149261&amp;page=&amp;view=&amp;sb=&amp;o=&amp;vc=1</a>

Sherman, Tx
<font color=red>Come Awn yall...Let's go to LUCHENBACH, TEXAS!!!</font color=red>

 

[BlazerBoy]

Yeah I checked those out, I was wondering if any one had any more pics or idea.. thanks

BlazerBoy
<a target="_blank" href=http://www.geocities.com/generalblueballs/>http://www.geocities.com/generalblueballs/</a>

 

[laketex]

cool. i've got a friend that's looking into making fiberglass custom ones, but that will prob be a ways off...

Sherman, Tx
<font color=red>Come Awn yall...Let's go to LUCHENBACH, TEXAS!!!</font color=red>

 

[Adrock]

you can try going to the Pirate board and looking at the toyota boards and stuff.there are a few toyotas for sale there that have some real nice half doors made out of half doors. i know that a toyota aint the same as chevy or whatever. but you said you wanted a good idea. and damn, those toyota boys are creative. check it out. http://www.pirate4x4.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic&amp;f=6&amp;t=007634
<a target="_blank" href=http://www.pirate4x4.com>www.pirate4x4.com</a>


Adam
a.k.a. Adrock
88 Chevy Blazer FI 383
"With great power there must also come great responsibility" -Spiderman

 

[BlazerBoy]

I was thinking about going lower than most of the pics that I am seeing, does anyone see any reason not. too. I mean heck I was thinking about going low enough so you dont even have to open it to get in. but yet leaving enough to catch stuff from falling out.

BlazerBoy
<a target="_blank" href=http://www.geocities.com/generalblueballs/>http://www.geocities.com/generalblueballs/</a>

 

[JoeAngelicchio]

Yeah go lower. The pics I have are higher but that can be changed. You'll get them tonight. NOW GET BACK TO WORK.....LOL

<font color=green>Joe Angelicchio
<a target="_blank" href=http://community.webshots.com/user/jangelicchio>http://community.webshots.com/user/jangelicchio</a>
Lisle, Ontario, CANADA</font color=green>

 

[FRIZZLEFRY]

There is a guy on the first gen board doing this .He got pics in progress and drawings.

"I AM THE HILIFT KING"<a target="_blank" href=http://community.webshots.com/user/beaterwhang>community.webshots.com/user/beaterwhang</a>

 

[Adrock]

because the chevy doors are so heavy and would be a pain to swap them, i've been tryin to think of a way to maybe cut the door up and weld panels where needed in a way that i can put a jeep soft door inside. like take the door and cut a hole in it that is the exact shape of a jeep soft door. and then be able to put the jeep soft doors on there and take them off. i'm not that great at decribing things but i tried. maybe it'll get the wheels turnin.

Adam
a.k.a. Adrock
88 Chevy Blazer FI 383
"With great power there must also come great responsibility" -Spiderman
"Juggernaut Smash" -Juggernaut

 

[Chris Demartini]

<font color=blue>Yeah check my post on the 1st gen board. I have the picture and the drawing on off-road.ws which is down right now so you cant see the pics until its back up.</font color=blue>