CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Need help with part number SOLVED
- Thread starter FinnDRZ
- Start date
dieselponyexpress
1/2 ton status
Assuming it's for your 12b
Then, 9 37 are the teeth countings. So that gives you a 4.11 ratio. I think you have to go with carrier 4 (3.90 & up).
Walter
Then, 9 37 are the teeth countings. So that gives you a 4.11 ratio. I think you have to go with carrier 4 (3.90 & up).
Walter
Nobody knows?
The problem is: I have a 12b with (broken) LS carrier series 4. I'd like to install LockRight, but the carrier is wrong (LS).
Now I'm able to have another carrier , part number 326662N . Is this series 3 or 4, and if it is 4, will it fit?
Please help...
The problem is: I have a 12b with (broken) LS carrier series 4. I'd like to install LockRight, but the carrier is wrong (LS).
Now I'm able to have another carrier , part number 326662N . Is this series 3 or 4, and if it is 4, will it fit?
Please help...
Mudstud
1/2 ton status
Call the locker company and have them help you out. Randy's R&P might could help you too.
Mudstud said:
Better if they have email ... calling the US from Finland is expensive and means he has to be up in the middle of the night
-- A
Problem solved, thanks anyway 
There is a good website with good information: www.markwilliams.com/ringpin.aspx
There is a good website with good information: www.markwilliams.com/ringpin.aspx
