Need Lots of Stuff

[daleearnhardt01]

Just picked up a another K5, going to need a bunch of stuff to get it the way I need it.

Need a 85-88 4 Headlight core support, grille, lights, ect. Basically converting single headlight to the 4 light system.

Need an 8 lug 10 bolt in the 4.10 flavor or at least the stuff to swap over to 8 lug from 6

EDITED: Have found everything else but still looking for this stuff

 

[Muddytazz]

I have the brush alum dash bezel out of an 81 (ie: wiper switch still on the dash).

I also have full electric doors if your looking for the guts.

 

[bronc3buster842001]

Ive got a core support and a a/c condensor.

 

[skyyk5]

I got 8 lug hubs

 

[87 Blue Beast]

i too have a condensor

 

[daleearnhardt01]

Ill keep you guys in mind if I cant find anything a little closer, although you PA boys might be a good idea cause everything else Im finding is in PA so I might just have to come up and grab everything.

 

[muddybuddy]

ive got a complete red interior (only thing i dont have is carpet) still in the truck and we are real close, you could get that '91 clip at the same time if u wanted. lmk

also got bezels and a custom grill from my '86 k10 that are in great condition if u end up going with the '84-'88 setup

 

[deadlew]

Got some Ford 8 lug 44 stuff. Can also help with gears. Drop me a PM.

PaulC

 

[91SCK5]

got grey buckets out of my 91. in columbia, sc.

 

[daleearnhardt01]

TTT,

Top priority is finding that front clip!

Looks like I have found a core support so all I need is grille and stuff..

 

[BulldogK5]

Why do you need the whole front clip? i looked at the pics you have and it appears all you need are the headlight bezels. If so, those can be had rather inexpensively from LMC.

 

[kennyw]

Why do you need the whole front clip? i looked at the pics you have and it appears all you need are the headlight bezels. If so, those can be had rather inexpensively from LMC.

Basically converting single headlight to the 4 light system

You just need to read a little closer.

 

[fryed_1]

Got a 4.10 D44 sitting in the yard right now and spins. Needs rebuilt though and no outers. Was out of an 84 (I think) 3/4T 4wd pickup if I remember right. Right up the road in Fredericksburg.

Bring over a case of cheap beer and we'll load it up and it's yours.

 

[daleearnhardt01]

Still need a 4.10 8 lug 10 bolt front!

 

[fryed_1]

The D44 will bolt right in and has 4:10. Will probably need ball joints cleaned up and new ubolts, but it works.

Pick it up if you want, it's damned near free, otherwise I'm tossing it after next weekend.

 

[skyyk5]

If you toss it I need a open 4.10 up d44 carrier

 

[fryed_1]

This should work. It's from an 84 burb 3/4t I think.

 

[skyyk5]

I really just need the carrier. '84 had the D44? Chevy gets me at times, my '79 k20 had a 10 bolt.

 

[fryed_1]

I don't know the exact year, but it's early-mid 80's I know that. I do know it was out of a 3/4t burb though. I used it for the outers since I got a good deal on alloy shafts for a 10b, warn outers and 5.13's. So it wasn't worth it to me to swap them out.

 

[skyyk5]

I have heard of '80's with d44's , yet my '79 had the 10b. Just weird to me. Anyway drop me a PM if you are going to scrap it and would like to sell the carrier.