Fabrimacator21
1/2 ton status
I will sell the longblock itself or complete with accessories and holley tbi setup.
Completly rebuilt with 0 miles on it. Broke in the cam and idled in the driveway... otherwise never run.
Heres the specs...
.030 over
Chevy Camel Hump Heads casting #3927186 1.94 Intake and 1.50 Exhaust
valves 64cc chambers. -
New Speed Pro H345NP Flat Top Pistons 10 to 1 Compression Ratio with
64cc heads-
Reconditioned GM X Rods -
New Sealed Power File Fit Moly Rings -
New 350 Horse Cam, Lifters - 447 Lift and 272 duration at 050 Lift
(Nice Muscle Car Idle) -
New Cloyes Double Roller Timing Set -
New Melling High Volume Oil Pump with welded pick up and hardened
distributor drive (about 60 psi oil pressure)-
New Edelbrock Chrome Valve Covers -
New Clevite 77 Rod, Main and Cam Bearings -
Balanced Rotating Assembly and Fel-Pro Gaskets -
New Chrome Pan and Timing Cover
I can also include the starter, alternator, water pump, AC pump, AIR pump, Holley 670 cfm tbi, holley fuel pump, EGR, computer (with $275 prominator and ALDL Cable for custom tuning), Harness, distributor, flowtech headers and Y pipe, and flywheel. All the accessories are from a '88 K5 Blazer.
I'm asking 1400 for the longblock WITH a holley tbi intake manifold... price will change with any of the things listed in the above paragraph. Make me an offer.
Pm me or email me at [email protected]
Completly rebuilt with 0 miles on it. Broke in the cam and idled in the driveway... otherwise never run.
Heres the specs...
.030 over
Chevy Camel Hump Heads casting #3927186 1.94 Intake and 1.50 Exhaust
valves 64cc chambers. -
New Speed Pro H345NP Flat Top Pistons 10 to 1 Compression Ratio with
64cc heads-
Reconditioned GM X Rods -
New Sealed Power File Fit Moly Rings -
New 350 Horse Cam, Lifters - 447 Lift and 272 duration at 050 Lift
(Nice Muscle Car Idle) -
New Cloyes Double Roller Timing Set -
New Melling High Volume Oil Pump with welded pick up and hardened
distributor drive (about 60 psi oil pressure)-
New Edelbrock Chrome Valve Covers -
New Clevite 77 Rod, Main and Cam Bearings -
Balanced Rotating Assembly and Fel-Pro Gaskets -
New Chrome Pan and Timing Cover
I can also include the starter, alternator, water pump, AC pump, AIR pump, Holley 670 cfm tbi, holley fuel pump, EGR, computer (with $275 prominator and ALDL Cable for custom tuning), Harness, distributor, flowtech headers and Y pipe, and flywheel. All the accessories are from a '88 K5 Blazer.
I'm asking 1400 for the longblock WITH a holley tbi intake manifold... price will change with any of the things listed in the above paragraph. Make me an offer.
Pm me or email me at [email protected]
Last edited:
