Wanted NP241c w/mechanical speedo

[jimmyleetn]

I know they only made them one year for Blazers, Jimmys, and Burbs so they are not super common but I've decided I'd like to swap one into my '88 Blazer if I can find one instead of rebuilding the NP208c in it currently. I can and will drive within reason. I can cover shipping too if you can get me a quote. Not interested in cracked cases or broken ears, just a good rebuildable case. I'm located in West TN.

 

[Classiccar]

There was one on Facebook marketplace for a couple hundred by Springfield il

 

[jimmyleetn]

There was one on Facebook marketplace for a couple hundred by Springfield il

Thanks for the tip. I took a look but couldn't find it. Found typical driver drops but nothing that appeared to be what Im looking for. Drop the link or a screenshot of you see it again.

 

[Classiccar]

They said it was for a 1984 Chevy but it was a 241-c

 

[Classiccar]

This is it

 

[imiceman44]

This is it

View attachment 386809

Looks like a 241 c to me

 

[jimmyleetn]

It is a passenger drop np241c for sure. I'd never found it since it's mislabeled. Gonna message him in the morning.

 

[Capt Ron]

From the factory 1984s have a 208 case. It is hard to tell from the pic if it is a 241 or 208. Tail shaft housing is very different between the two. Kinda looks like a 208 to me.

 

[imiceman44]

From the factory 1984s have a 208 case. It is hard to tell from the pic if it is a 241 or 208. Tail shaft housing is very different between the two. Kinda looks like a 208 to me.

208 tail is tapered all the way.
241 tail is slightly tapered to the speedo gear housing.
Pretty sure it's a 241.

 

[jimmyleetn]

It's definitely a 241c. His second picture is of the badge.

 

[jimmyleetn]

Well I'm too late. The search continues. I searched everywhere within probably roughly 500 mi of me. I did find one in Kansas City but it's VSS and too far to drive.

 

[CUCV2]

Not real close to you and it has a SYE installed but I have one out of my 89 K5. Only has 58K. The SYE has 0 miles. If you really need one, let me know. It's the 27 spline version.

 

[Classiccar]

I got a mechanical housing. If you find one with vss.

 

[jimmyleetn]

I got a mechanical housing. If you find one with vss.

That would work too. I've slowed down my search a little but I may need to look again since it's been a few weeks and see one's out there now.

 

[Classiccar]

That would work too. I've slowed down my search a little but I may need to look again since it's been a few weeks and see one's out there now.

Just got it. It’s for a dodge it won’t fit... back to the drawing board