CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Oil Pressure Sending unit on a 03 suburban
- Thread starter 89bigblue
- Start date
posting up which engine would sure help.
but yah, it should be just about the same spot as old school smallblocks, behind the intake manifold on the drivers side. kinda tall, but you might need to pull the manifold to swap it. not sure how much room you have.
but yah, it should be just about the same spot as old school smallblocks, behind the intake manifold on the drivers side. kinda tall, but you might need to pull the manifold to swap it. not sure how much room you have.
you can see it in this pic.... its the tall black thing in the back of the engine.
http://www.ls1howto.com/howto/c5/heads.cam.pulley/pics/heads_papertowel.jpg
i would think you can probably check your gauge and wiring after you unplug that sending unit, by shorting the grey (5V+ reference) wire to the Tan/White (oil psi signal) wire and making sure it pegs out.
http://www.ls1howto.com/howto/c5/heads.cam.pulley/pics/heads_papertowel.jpg
i would think you can probably check your gauge and wiring after you unplug that sending unit, by shorting the grey (5V+ reference) wire to the Tan/White (oil psi signal) wire and making sure it pegs out.
