older standard warn hub assembly

[rick88blaze]

I won a box of dana 44 hub parts on ebay and included in that was an older set of warn hubs. I think I figured out how they assemble but I wanted to throw a couple pic's up on here to double check. If you see a part in the wrong place please let me know. Also let me know if I'm missing a part. There are a couple other pieces but I wasn't sure if they went with the hubs or not. Thanks in advance. Rick

 

[koldsimer]

Something doesn't look right but i'm not familiar with that style hub so... It looks like the drive portions couldn't engage with them setup like that. I may be completely wrong though.

 

[rick88blaze]

I know that these are kind of backwards from the newer ones. The spring would push the inner gear back off of the outer gear to disengage it. The outer gear would be held outwards by either the snap ring or spindle nuts.

Rick

 

[sweetk30]

those are spicer hubs buddy . old style early 70s hubs.

 

[rick88blaze]

That's even better then. does it look like all of the parts are there?

Rick

 

[rick88blaze]

ttt

 

[sweetk30]

dont know as i only play with 60s