Output Shaft

[nocok5]

Does anybody know how long the output shaft for a Turbo 350 tranny is. My truck is a stock 1970 Blazer with a 350 engine and T-350 tranny. I ordered a transmission online and they need the output shaft measurement. I can't physically measure it for a week or so due to work so I'm wondering if anybody knows the number off the top of their head. Seems like a dumb question to me but maybe there are differences I'm not aware of between different years etc. Thanks

 

[imiceman44]

Does anybody know how long the output shaft for a Turbo 350 tranny is. My truck is a stock 1970 Blazer with a 350 engine and T-350 tranny. I ordered a transmission online and they need the output shaft measurement. I can't physically measure it for a week or so due to work so I'm wondering if anybody knows the number off the top of their head. Seems like a dumb question to me but maybe there are differences I'm not aware of between different years etc. Thanks

I have one sitting in my shed so I will measure it for you tomorrow but I remember it around 2" stick out.

 

[Hogback Fabrication]

There are at least 3 versions that I know of, the 203/205 version output shaft that you have (sticks out the end of the case ~7/8" IIRC), the output that went with early 80's NP208's (2-2.5" or so) and the 2WD version that is longer as well.

 

[nocok5]

I think I got it straightened out. Hopefully the transmission works out ok. I should have checked this website and some others before ordering from this company. I'll be optimistic though thanks again for the info.

 

[sweetk30]

if 4wd and 203 or 205 on a th350 = shortest option .