Got bit by the corporate bean counters today so now that im jobless ive got to get rid of my project there is lots of new never used stuff here as well
I got laid off and recieved my k5 back from the sandblaster on the same day ! i never have cracked these open i have no idea what the gear ratios are only that i could say i have 39" tires and goin round 65 on the highway on a th400 i was about 4k rpm
d 60 front with ord x over steering $1350
corp 14bff has an eaton posi in it $500
remember these axles are under a blazer and have the disc brake conversion already done they are freshly sandblasted in virtually brand new condition and will be ready to go
i have Diy 4x Ubolts and spring plates and ez inch for this one theres 150 right there
Engine
350 chevy 3000 miles on it edelbrock carb and intake newly rebuilt 130 amp alt brand new starter had a recipt from the dealer for 2300 but lost it when i took it to work to get info bout the motor .. so all i know is its a crate motor i dont know hp compression ratio ect ect
felt pretty healthy im selling it with carb and all accesories attached
$750
th400 tranny has about 18k miles on it
$350
np205 x case 18k miles
$200
custom cv joint driveshafts truck has 8 in lift i have a recipt for 2200 on these from the previous owner i believe its from arizona driveline ill have to find the recipt
$500 pair
*brand new inner fenders
$ 40 each
*brand new fenders both sides
$90 each
*brand new dpi rock sliders
http://dpalms.com/dpi/images/TrailRider.htm
$175
*brand new: interior carpet kit dark charcoal color
$125
*brand new: 4 bilstein 5150 (BF5-A198-H1) 14.53 travel 255/70 valving
$75 each
http://www.bilstein.com/offroad_5150.php
(SOLD)*brand new cast ford shock towers (SOLD)
$ 30 bucks
(SOLD)*brand new ord weld in frame repair and brace(SOLD)
$100 bucks
(SOLD)*brand new DIY4x shackle flip ( sand blasted )(SOLD)
$100
(SOLD!)*brand new diy 4x inboard shock kit ( sand blasted) (SOLD!)
$100
*brand new d 60 and corp 14bff ruff stuff 3/8" diff covers http://www.ruffstuffspecialties.com....html?osCsid=924ef97aae31729524cf86078df2a5b2
$ 60 EACH (14bff COVER GONE D60 STILL LEFT)
15 x 12 steelies with 38.5 x 15 x 15 thorn turds on em bout 50% tread 150 OMG CHEAP
*brand new (never been on the truck) 5 diamo 17k 18" x 10 with 38 x 15.5 x 18 toyo open country mt's $2300 paid 3350 for em
*brand new bds 4 inch lift rear springs 52" $250
(SOLD)Tach oil and water autometer sport comp gauges $50 (SOLD)
*Brand new Power window kit from
http://electric-life.com/shopexd.asp?id=918 fitment
73-77 BLAZER FULL SIZE FRONT DOOR (USE WITH 78 AND LATER WINDOW SASH)
78-91 BLAZER K-5 FULL SIZE FRONT DOOR
73-77 PICKUP FRONT DOOR(USE WITH 78 AND LATER WINDOW SASH)
78-87 PICKUP FULL SIZE, C, K, R, V FRONT DOOR 78-91 SUBURBAN FULL SIZE FRONT DOOR
$175 inc wiring harness which u have to buy seprately new
ok im getting tired theses more stuff like the super lift front and rear springs 8" freshly sand blasted, doors , hood , cab , wiring harnesses got an blower shroud w/o a/c and one with a/c and anything else you may think of lemme know
if you want to take over the project or buy the freshly blasted chassis with the axles and 8 inch lift already done we can talk bout that as well
paul 720-940-8268 cell im up till 12 easily every night dont be shy ... you can also text me this is my cell !
also you can pay with paypal or money order or certified check
I got laid off and recieved my k5 back from the sandblaster on the same day ! i never have cracked these open i have no idea what the gear ratios are only that i could say i have 39" tires and goin round 65 on the highway on a th400 i was about 4k rpm
d 60 front with ord x over steering $1350
corp 14bff has an eaton posi in it $500
remember these axles are under a blazer and have the disc brake conversion already done they are freshly sandblasted in virtually brand new condition and will be ready to go
i have Diy 4x Ubolts and spring plates and ez inch for this one theres 150 right there
Engine
350 chevy 3000 miles on it edelbrock carb and intake newly rebuilt 130 amp alt brand new starter had a recipt from the dealer for 2300 but lost it when i took it to work to get info bout the motor .. so all i know is its a crate motor i dont know hp compression ratio ect ect
felt pretty healthy im selling it with carb and all accesories attached
$750
th400 tranny has about 18k miles on it
$350
np205 x case 18k miles
$200
custom cv joint driveshafts truck has 8 in lift i have a recipt for 2200 on these from the previous owner i believe its from arizona driveline ill have to find the recipt
$500 pair
*brand new inner fenders
$ 40 each
*brand new fenders both sides
$90 each
*brand new dpi rock sliders
http://dpalms.com/dpi/images/TrailRider.htm
$175
*brand new: interior carpet kit dark charcoal color
$125
*brand new: 4 bilstein 5150 (BF5-A198-H1) 14.53 travel 255/70 valving
$75 each
http://www.bilstein.com/offroad_5150.php
(SOLD)*brand new cast ford shock towers (SOLD)
$ 30 bucks
(SOLD)*brand new ord weld in frame repair and brace(SOLD)
$100 bucks
(SOLD)*brand new DIY4x shackle flip ( sand blasted )(SOLD)
$100
(SOLD!)*brand new diy 4x inboard shock kit ( sand blasted) (SOLD!)
$100
*brand new d 60 and corp 14bff ruff stuff 3/8" diff covers http://www.ruffstuffspecialties.com....html?osCsid=924ef97aae31729524cf86078df2a5b2
$ 60 EACH (14bff COVER GONE D60 STILL LEFT)
15 x 12 steelies with 38.5 x 15 x 15 thorn turds on em bout 50% tread 150 OMG CHEAP
*brand new (never been on the truck) 5 diamo 17k 18" x 10 with 38 x 15.5 x 18 toyo open country mt's $2300 paid 3350 for em
*brand new bds 4 inch lift rear springs 52" $250
(SOLD)Tach oil and water autometer sport comp gauges $50 (SOLD)
*Brand new Power window kit from
http://electric-life.com/shopexd.asp?id=918 fitment
73-77 BLAZER FULL SIZE FRONT DOOR (USE WITH 78 AND LATER WINDOW SASH)
78-91 BLAZER K-5 FULL SIZE FRONT DOOR
73-77 PICKUP FRONT DOOR(USE WITH 78 AND LATER WINDOW SASH)
78-87 PICKUP FULL SIZE, C, K, R, V FRONT DOOR 78-91 SUBURBAN FULL SIZE FRONT DOOR
$175 inc wiring harness which u have to buy seprately new
ok im getting tired theses more stuff like the super lift front and rear springs 8" freshly sand blasted, doors , hood , cab , wiring harnesses got an blower shroud w/o a/c and one with a/c and anything else you may think of lemme know
if you want to take over the project or buy the freshly blasted chassis with the axles and 8 inch lift already done we can talk bout that as well
paul 720-940-8268 cell im up till 12 easily every night dont be shy ... you can also text me this is my cell !
also you can pay with paypal or money order or certified check
Last edited:
